Design, Fabrication and Mechanical Characterization of Composite Plate
International Journal of Vehicle Structures and Systems · 07.03.2026 · 18 (2)
DOI: 10.4273/ijvss.18.2.21 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Vehicle Structures and Systems, online erschienen am 07.03.2026. Verfasst von G.S. Divya und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The study examines the design, fabrication and analysis of carbon fiber reinforced epoxy (CF/Ep) composite plates enhanced with silicon carbide (SiC) microparticles. Composites with varying SiC content (0%, 5% and 10%) were produced using vacuum bagging and tested for density, hardness, impact strength, tensile strength and flexural strength. SiC addition increased the density and hardness, with maximum hardness at 10% SiC. However, impact strength decreased due to brittleness. Tensile strength and Young's modulus peaked at 3% SiC, while flexural strength was highest at 10% SiC, as confirmed by ANSYS 2024 R2 analysis of total deformation and normal elastic strain. These findings highlight the need for optimal SiC content to balance strength and toughness in CF/Ep composites.
Zitieren
APA
Divya, G., Vijay, T., Adarsh, P., Shekar, K., Prasanna, C., & Pawar, S. (2026). Design, Fabrication and Mechanical Characterization of Composite Plate. International Journal of Vehicle Structures and Systems, 18(2). https://doi.org/10.4273/ijvss.18.2.21
Vancouver
Divya G, Vijay T, Adarsh P, Shekar K, Prasanna C, Pawar S. Design, Fabrication and Mechanical Characterization of Composite Plate. International Journal of Vehicle Structures and Systems. 2026;18(2). doi:10.4273/ijvss.18.2.21
BibTeX
@article{Divya2026,
author = {Divya, G.S. and Vijay, T. and Adarsh, P. and Shekar, K. and Prasanna, C.K. and Pawar, S.Y.},
title = {Design, Fabrication and Mechanical Characterization of Composite Plate},
journal = {International Journal of Vehicle Structures and Systems},
year = {2026},
volume = {18},
number = {2},
doi = {10.4273/ijvss.18.2.21}
}
EUVIMED