EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Treatment Effects on Wire and Arc Additive Manufactured ER308L Components

A. Sirisha Bhadrakali, D.V.A. Rama Sastry, T. Ramprabhu, A.B. Srinivasa Rao

International Journal of Vehicle Structures and Systems · 31.12.2023 · 15 (7)

DOI: 10.4273/ijvss.15.7.22 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Vehicle Structures and Systems, online erschienen am 31.12.2023. Verfasst von A. Sirisha Bhadrakali und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of numerous techniques and technologies for adding materials has led to the rise in popularity of additive manufacturing techniques over the past two decades. Wire and Arc Additive Manufacturing (WAAM) is one of these Additive Manufacturing processes that gained its importance for manufacturing metal components on a large scale with high quality. The enhancements in surface quality, mechanical properties and step-down of the residual stresses are critical for the WAAM process. During the WAAM process, excessive heat accumulation can inhibit the bead's exact control and lead to mechanical properties and microstructure differences. Hence, heat treatment is essential to achieve isotropic properties. In the present work, SS-308L is used as wire material and components are deposited using WAAM. These specimens are subjected to various heat treatment processes and the surface roughness, hardness tests are done according to ASTM standards.

Zitieren

APA

Bhadrakali, A. S., Sastry, D. R., Ramprabhu, T., & Rao, A. S. (2023). Heat Treatment Effects on Wire and Arc Additive Manufactured ER308L Components. International Journal of Vehicle Structures and Systems, 15(7). https://doi.org/10.4273/ijvss.15.7.22

Vancouver

Bhadrakali AS, Sastry DR, Ramprabhu T, Rao AS. Heat Treatment Effects on Wire and Arc Additive Manufactured ER308L Components. International Journal of Vehicle Structures and Systems. 2023;15(7). doi:10.4273/ijvss.15.7.22

BibTeX
@article{Bhadrakali2023,
  author = {Bhadrakali, A. Sirisha and Sastry, D.V.A. Rama and Ramprabhu, T. and Rao, A.B. Srinivasa},
  title = {Heat Treatment Effects on Wire and Arc Additive Manufactured ER308L Components},
  journal = {International Journal of Vehicle Structures and Systems},
  year = {2023},
  volume = {15},
  number = {7},
  doi = {10.4273/ijvss.15.7.22}
}
Kostenlos starten →