Study of Characterization of Nano-additives and Its Impact on the Diesel Engine Characteristics Fueled with Ternary Biodiesel Blend
SAE International Journal of Materials and Manufacturing · 31.08.2024 · 18 (1) · 17-38
DOI: 10.4271/05-18-01-0002 ↗Kurz gefasst
Fachartikel in der Zeitschrift SAE International Journal of Materials and Manufacturing, online erschienen am 31.08.2024. Verfasst von Nagarajan Jeyakumar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 74 Literaturangaben.
Abstract (Originalsprache)
The present work deals with the effects of nano-additives on ternary blend biodiesel fuel added in diesel engine. The ternary blend comprises of mustard oil biodiesel and rice bran oil biodiesel, synthesized by means of transesterification and diesel. Nano-additives used in the current study include carbon nanotubes (CNT) and MgO/MgAl2O4 spinel, which were added in a suitable concentration to the biodiesel. CNTs were procured from the market and MgO/MgAl2O4 spinel was prepared by co-precipitation via ball milling process. The nano-additives were characterized by means of FTIR (Fourier transform infrared spectroscopy), AFM (atomic force microscopy), and DSC (differential scanning calorimetry) analysis. Biodiesel blend samples were prepared such as B20 (20% biodiesel + 80% diesel), B20 + CNT (1000 PPM), B20+MgO/MgAl2O4 spinel (1000 PPM), and B20+CNT+MgO/MgAl2O4 spinel (1000 PPM) were tested against diesel fuel. The maximum increase in brake thermal efficiency (BTE), oxides of nitrogen (NOx), and the maximum reduction in brake specific fuel consumption (BSFC), carbon monoxide (CO), hydrocarbon (HC), and smoke was observed for B20+CNT+MgO/MgAl2O4 at full load conditions when compared to B20. B20+CNT+MgO/MgAl2O4 indicated the maximum advancement of mass fraction burned (MFB) 50% compared to other fuel blends, which is reflected in the other performance, emission, and combustion characteristics. The highest peak cylinder pressure (Pcyl) was recorded for B20+MgO/MgAl2O4 despite the presence of large quantity of oxygen, which reduced slightly (0.63%) due to the addition of CNT. The highest heat release rate (HRR) was recorded for B20+MgO/MgAl2O4 in spite of presence of large quantity of oxygen which reduced slightly (1.73%) due to the addition of CNT.
Zitieren
APA
Jeyakumar, N., Dhinesh, B., & Venugopal, I. P. (2024). Study of Characterization of Nano-additives and Its Impact on the Diesel Engine Characteristics Fueled with Ternary Biodiesel Blend. SAE International Journal of Materials and Manufacturing, 18(1), 17-38. https://doi.org/10.4271/05-18-01-0002
Vancouver
Jeyakumar N, Dhinesh B, Venugopal IP. Study of Characterization of Nano-additives and Its Impact on the Diesel Engine Characteristics Fueled with Ternary Biodiesel Blend. SAE International Journal of Materials and Manufacturing. 2024;18(1):17-38. doi:10.4271/05-18-01-0002
BibTeX
@article{Jeyakumar2024,
author = {Jeyakumar, Nagarajan and Dhinesh, Balasubramanian and Venugopal, Inbanaathan Papla},
title = {Study of Characterization of Nano-additives and Its Impact on the Diesel Engine Characteristics Fueled with Ternary Biodiesel Blend},
journal = {SAE International Journal of Materials and Manufacturing},
year = {2024},
volume = {18},
number = {1},
pages = {17--38},
doi = {10.4271/05-18-01-0002}
}
EUVIMED