EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Understanding Thermal Pre-Ignition Mechanisms in Lean Premixed Spark-Ignition Hydrogen Engines Using a Robust Pre-Ignition Characterization Approach

Abdullah Umair Bajwa, Vickey Kalaskar, Ryan Williams

SAE International Journal of Engines · 10.11.2026 · 19 (6)

DOI: 10.4271/03-19-06-0029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SAE International Journal of Engines, online erschienen am 10.11.2026. Verfasst von Abdullah Umair Bajwa und 2 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen engines are a promising decarbonization pathway for the transport sector; however, their performance is constrained by the abnormal combustion phenomenon of pre-ignition (PI). While hydrogen PI shares similarities with the extensively studied “low-speed PI” observed in boosted gasoline engines, it exhibits distinct characteristics, notably higher frequency and lower individual cycle intensity. These differences arise from the thermochemical properties of hydrogen and differing operating strategies, most notably lean versus stoichiometric combustion.



This study investigates the mechanisms of hydrogen PI, broadly divided into hotspot vs oil-induced pathways, in a heavy-duty, lean-burn, port fuel–injected, spark-ignition (SI) hydrogen engine. Experimental data at three combustion phasing conditions are analyzed to understand the dominant mechanisms. Retarding ignition timing increased PI frequency from under 5% to over 20% by extending the pre-spark window during which PI triggers could initiate combustion. Oil droplet autoignition is believed to be the primary PI mechanism under the tested conditions. For quantitative assessment of PI frequency, a median-based statistical approach is proposed to identify events based on early combustion onset and/or elevated peak pressure. This approach addresses limitations of conventional standard deviation–based outlier detection methods (like the Grubbs’ method), which are prone to statistical masking at the high-PI frequencies observed.

Zitieren

APA

Bajwa, A. U., Kalaskar, V., & Williams, R. (2026). Understanding Thermal Pre-Ignition Mechanisms in Lean Premixed Spark-Ignition Hydrogen Engines Using a Robust Pre-Ignition Characterization Approach. SAE International Journal of Engines, 19(6). https://doi.org/10.4271/03-19-06-0029

Vancouver

Bajwa AU, Kalaskar V, Williams R. Understanding Thermal Pre-Ignition Mechanisms in Lean Premixed Spark-Ignition Hydrogen Engines Using a Robust Pre-Ignition Characterization Approach. SAE International Journal of Engines. 2026;19(6). doi:10.4271/03-19-06-0029

BibTeX
@article{Bajwa2026,
  author = {Bajwa, Abdullah Umair and Kalaskar, Vickey and Williams, Ryan},
  title = {Understanding Thermal Pre-Ignition Mechanisms in Lean Premixed Spark-Ignition Hydrogen Engines Using a Robust Pre-Ignition Characterization Approach},
  journal = {SAE International Journal of Engines},
  year = {2026},
  volume = {19},
  number = {6},
  doi = {10.4271/03-19-06-0029}
}
Kostenlos starten →