Ducted Fuel Injection versus Conventional Diesel Combustion: An Operating-Parameter Sensitivity Study Conducted in an Optical Engine with a Four-Orifice Fuel Injector
SAE International Journal of Engines · 13.04.2020 · 13 (3) · 345-362
DOI: 10.4271/03-13-03-0023 ↗Kurz gefasst
Fachartikel in der Zeitschrift SAE International Journal of Engines, online erschienen am 13.04.2020. Verfasst von Christopher W. Nilsen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Ducted fuel injection (DFI) has been shown to attenuate engine-out soot emissions from diesel engines. The concept is to inject fuel through a small tube within the combustion chamber to enable lower equivalence ratios at the autoignition zone, relative to conventional diesel combustion. Previous experiments have demonstrated that DFI enables significant soot attenuation relative to conventional diesel combustion for a small set of operating conditions at relatively low engine loads. This is the first study to compare DFI to conventional diesel combustion over a wide range of operating conditions and at higher loads (up to 8.5 bar gross indicated mean effective pressure) with a four-orifice fuel injector. This study compares DFI to conventional diesel combustion through sweeps of intake-oxygen mole fraction (XO2), injection duration, intake pressure, start of combustion (SOC) timing, fuel-injection pressure, and intake temperature. DFI is shown to curtail engine-out soot emissions at all tested conditions. Under certain conditions, DFI can attenuate engine-out soot by over a factor of 100. In addition to producing significantly lower engine-out soot emissions, DFI enables the engine to be operated at low-NOx conditions that are not feasible with conventional diesel combustion due to high soot emissions.
Zitieren
APA
Nilsen, C. W., Biles, D. E., Yraguen, B. F., & Mueller, C. J. (2020). Ducted Fuel Injection versus Conventional Diesel Combustion: An Operating-Parameter Sensitivity Study Conducted in an Optical Engine with a Four-Orifice Fuel Injector. SAE International Journal of Engines, 13(3), 345-362. https://doi.org/10.4271/03-13-03-0023
Vancouver
Nilsen CW, Biles DE, Yraguen BF, Mueller CJ. Ducted Fuel Injection versus Conventional Diesel Combustion: An Operating-Parameter Sensitivity Study Conducted in an Optical Engine with a Four-Orifice Fuel Injector. SAE International Journal of Engines. 2020;13(3):345-362. doi:10.4271/03-13-03-0023
BibTeX
@article{Nilsen2020,
author = {Nilsen, Christopher W. and Biles, Drummond E. and Yraguen, Boni F. and Mueller, Charles J.},
title = {Ducted Fuel Injection versus Conventional Diesel Combustion: An Operating-Parameter Sensitivity Study Conducted in an Optical Engine with a Four-Orifice Fuel Injector},
journal = {SAE International Journal of Engines},
year = {2020},
volume = {13},
number = {3},
pages = {345--362},
doi = {10.4271/03-13-03-0023}
}
EUVIMED