Co-optimization of Energy Efficiency and Drivability for Dual-Motor Electric Commercial Vehicles: A Topology-Aware Hierarchical Approach
SAE International Journal of Commercial Vehicles · 29.07.2026 · 19 (4)
DOI: 10.4271/02-19-04-0026 ↗Kurz gefasst
Fachartikel in der Zeitschrift SAE International Journal of Commercial Vehicles, online erschienen am 29.07.2026. Verfasst von Dafeng Song und 3 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.
Abstract (Originalsprache)
Dual-motor architectures provide additional operating degrees of freedom for electric commercial vehicles (ECVs), but the integration of automated manual transmissions (AMTs) introduces torque discontinuities during gear-related mode transitions. Existing energy management strategies usually focus on steady-state efficiency optimization, while the mechanical feasibility of mode transitions is often considered separately or neglected. To address this issue, this study proposes a topology-aware hierarchical control framework for dual-motor ECVs. The framework combines an offline global efficiency map with an online transition-feasibility arbitration mechanism. In the offline layer, the energy-oriented operating mode and torque split are extracted over the vehicle-speed and wheel-torque domain. In the online layer, a topology-based transition matrix is used to identify mechanically singular mode transitions, and potentially torque-interrupting commands are re-routed through feasible bridge modes. The proposed method embeds powertrain topology constraints into the real-time implementation of an offline optimal map, thereby complementing conventional global optimization methods with transition-feasibility arbitration. Simulation results under the CHTC driving cycle show that the proposed strategy improves torque continuity during mode transitions while retaining most of the energy-saving benefit of the unconstrained efficiency-oriented strategy. Compared with the rule-based strategy, the proposed method reduces SOC-equivalent energy consumption by 10.7%, and recovers 65.5% of the DP-achievable energy-saving potential. Hardware-in-the-Loop (HIL) results further demonstrate that the proposed online arbitration logic can be executed within the controller sampling period.
Zitieren
APA
Song, D., Chen, L., Zeng, X., & Ni, L. (2026). Co-optimization of Energy Efficiency and Drivability for Dual-Motor Electric Commercial Vehicles: A Topology-Aware Hierarchical Approach. SAE International Journal of Commercial Vehicles, 19(4). https://doi.org/10.4271/02-19-04-0026
Vancouver
Song D, Chen L, Zeng X, Ni L. Co-optimization of Energy Efficiency and Drivability for Dual-Motor Electric Commercial Vehicles: A Topology-Aware Hierarchical Approach. SAE International Journal of Commercial Vehicles. 2026;19(4). doi:10.4271/02-19-04-0026
BibTeX
@article{Song2026,
author = {Song, Dafeng and Chen, Lexin and Zeng, Xiaohua and Ni, Lixin},
title = {Co-optimization of Energy Efficiency and Drivability for Dual-Motor Electric Commercial Vehicles: A Topology-Aware Hierarchical Approach},
journal = {SAE International Journal of Commercial Vehicles},
year = {2026},
volume = {19},
number = {4},
doi = {10.4271/02-19-04-0026}
}
EUVIMED