EUVIMEDEUVIMED entdecken
Crossref

Heavy-Duty Nonroad Material Handler Electrification Part 2: Energy Efficiency and Performance Evaluation

Alexander Czarnecki, Bryant Goodenough, Jeremy Worm, Darrell Robinette, Phil LaTendresse, John Westman, David Subert, Matthew Heath, Dylan Kiefer, Andrew Black

SAE International Journal of Commercial Vehicles · 02.06.2026 · 19 (3)

DOI: 10.4271/02-19-03-0016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SAE International Journal of Commercial Vehicles, online erschienen am 02.06.2026. Verfasst von Alexander Czarnecki und 9 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Decarbonization efforts achieved through electrification in nonroad mobile machinery can realize a reduction in fuel consumption of more than 20%, thanks to concepts familiar to light-duty passenger vehicles. This case study compares the results of a hybrid-electric material handler to its conventional counterpart, utilizing machine-specific drive cycles presented in part one of this paper series. The hybrid prototype features an extended-range electric vehicle (EREV) powertrain that demonstrated substantial energy efficiency improvements. Specifically, there was a reduction in equivalent fuel consumption of 75% when operating in electric-only mode, and 33% when maintaining the battery by charging with an on-board generator. Together, the efficiency improvements can be extrapolated over a low-intensity, 8-h shift characterized by significant idle time and highly dynamic engine load for a 47% reduction in net energy consumption. Key technologies that led to this improvement included engine downsizing and decoupling, regenerative braking, and an electrohydraulic pump unit with advanced controls. This study explains details of the powertrain architecture and subsystems that were implemented on a demonstration vehicle, control strategies used to meet project goals, and an analysis of energy consumption from testing on a closed course. Also included in this study is a discourse on comparison metrics that can be used for quantifying the energy consumption differences between hybrid-electric and conventional diesel powertrains in nonroad mobile machinery.

Zitieren

APA

Czarnecki, A., Goodenough, B., Worm, J., Robinette, D., LaTendresse, P., Westman, J., Subert, D., Heath, M., Kiefer, D., & Black, A. (2026). Heavy-Duty Nonroad Material Handler Electrification Part 2: Energy Efficiency and Performance Evaluation. SAE International Journal of Commercial Vehicles, 19(3). https://doi.org/10.4271/02-19-03-0016

Vancouver

Czarnecki A, Goodenough B, Worm J, Robinette D, LaTendresse P, Westman J, et al. Heavy-Duty Nonroad Material Handler Electrification Part 2: Energy Efficiency and Performance Evaluation. SAE International Journal of Commercial Vehicles. 2026;19(3). doi:10.4271/02-19-03-0016

BibTeX
@article{Czarnecki2026,
  author = {Czarnecki, Alexander and Goodenough, Bryant and Worm, Jeremy and Robinette, Darrell and LaTendresse, Phil and Westman, John and Subert, David and Heath, Matthew and Kiefer, Dylan and Black, Andrew},
  title = {Heavy-Duty Nonroad Material Handler Electrification Part 2: Energy Efficiency and Performance Evaluation},
  journal = {SAE International Journal of Commercial Vehicles},
  year = {2026},
  volume = {19},
  number = {3},
  doi = {10.4271/02-19-03-0016}
}
Kostenlos starten →