EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Occurrence of Dynamic Shear Bands in AISI 4340 Steel under Impact Loads

Gbadebo Owolabi, Daniel Odoh, Akindele Odeshi, Horace Whitworth

World Journal of Mechanics · 2013 · 03 (02) · 139-145

DOI: 10.4236/wjm.2013.32011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Journal of Mechanics, 2013. Verfasst von Gbadebo Owolabi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, occurrence of adiabatic shear bands in AISI 4340 steel under high velocity impact loads is investigated using finite element analysis and experimental tests. The cylindrical steel specimen subjected to impact load was divided into different sections separated by nodes using finite element method in ABAQUS environment with boundary conditions specified. The material properties were assumed to be lower at the section where the adiabatic shear bands are expected to initialize. The finite element model was used to determine the maximum flow stress, the strain hardening, the thermal softening, and the critical strain for the formation of adiabatic shear bands. Experimental results show that deformed bands were formed at low strain rates and there was a minimum strain rate required for formation of transformed band in the alloy. The experimental results also show that cracks were initiated and propagated along transformed bands leading to fragmentation under the impact loading. The susceptibility of the adiabatic shear bands to cracking was markedly influenced by strain-rates. The simulation results obtained were compared with experimental results obtained for the AISI 4340 steel under high strain-rate loading in compression using split impact Hopkinson bars. A good agreement between the experimental and simulation results was obtained.

Zitieren

APA

Owolabi, G., Odoh, D., Odeshi, A., & Whitworth, H. (2013). Occurrence of Dynamic Shear Bands in AISI 4340 Steel under Impact Loads. World Journal of Mechanics, 03(02), 139-145. https://doi.org/10.4236/wjm.2013.32011

Vancouver

Owolabi G, Odoh D, Odeshi A, Whitworth H. Occurrence of Dynamic Shear Bands in AISI 4340 Steel under Impact Loads. World Journal of Mechanics. 2013;03(02):139-145. doi:10.4236/wjm.2013.32011

BibTeX
@article{Owolabi2013,
  author = {Owolabi, Gbadebo and Odoh, Daniel and Odeshi, Akindele and Whitworth, Horace},
  title = {Occurrence of Dynamic Shear Bands in AISI 4340 Steel under Impact Loads},
  journal = {World Journal of Mechanics},
  year = {2013},
  volume = {03},
  number = {02},
  pages = {139--145},
  doi = {10.4236/wjm.2013.32011}
}
Kostenlos starten →