EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis, characterization of a multi-component metal oxide (Al<sub>0.88</sub>Fe<sub>0.67</sub>Zn<sub>0.28</sub>O<sub>3</sub>) and elimination of As (III) from aqueous solution.

M. A. Subhan, S. A. Monim, M. B. R. Bhuiyan, A. N. Chowdhury, M. Islam, M. A. Hoque

Open Journal of Inorganic Chemistry · 2011

DOI: 10.4236/ojic.2011.12002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Open Journal of Inorganic Chemistry, 2011. Verfasst von M. A. Subhan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The multi-component oxide (Al0.88Fe0.67Zn0.28O3)) surface (abbreviated as MCOS) was prepared to optimize the effectiveness of the elimination of As (III) from aqueous solution. The oxide surface was synthe-sized by co-precipitation method using corresponding metal carbonates. It was characterized by XRD, TGA and DSC. The surface morphology of MCOS was observed in SEM and the elemental analysis was accomplished by EDX. The composition of Al2O3, Fe2O3 & ZnO was 23.6, 39.9 and 20.6 wt% respectively in XRF analysis. The specific surface area was found 389.85 m2 g-1. Batch experiments were performed to remove As (III) from aqueous solution considering various parameters such as effect of pH, contact time, initial arsenic concentration, temperature and sor-bent dosage. The maximum sorption capacity of the surface was almost steady from pH 4 to pH 9. Kinetic study shows that As (III) sorption is following second order rate equation with the rate constant of 80×10-2 g mg-1 min-1 at room temperature and this rate was increased with increasing temperature which indicates the sorption was endothermic process. The free energy change, ΔGo was negative which proves that the sorption was spontaneous and thermodynamically favorable. Sorption isotherm was interpreted by Langmuir equation and the maximum sorption capacity of oxide monolayer was 13×10-2 mg g-1.

Zitieren

APA

Subhan, M. A., Monim, S. A., Bhuiyan, M. B. R., Chowdhury, A. N., Islam, M., & Hoque, M. A. (2011). Synthesis, characterization of a multi-component metal oxide (Al0.88Fe0.67Zn0.28O3) and elimination of As (III) from aqueous solution. Open Journal of Inorganic Chemistry. https://doi.org/10.4236/ojic.2011.12002

Vancouver

Subhan MA, Monim SA, Bhuiyan MBR, Chowdhury AN, Islam M, Hoque MA. Synthesis, characterization of a multi-component metal oxide (Al0.88Fe0.67Zn0.28O3) and elimination of As (III) from aqueous solution. Open Journal of Inorganic Chemistry. 2011. doi:10.4236/ojic.2011.12002

BibTeX
@article{Subhan2011,
  author = {Subhan, M. A. and Monim, S. A. and Bhuiyan, M. B. R. and Chowdhury, A. N. and Islam, M. and Hoque, M. A.},
  title = {Synthesis, characterization of a multi-component metal oxide (Al0.88Fe0.67Zn0.28O3) and elimination of As (III) from aqueous solution},
  journal = {Open Journal of Inorganic Chemistry},
  year = {2011},
  doi = {10.4236/ojic.2011.12002}
}
Kostenlos starten →