Finite Element Simulation of In-Stent Restenosis with Tissue Growth Model
Journal of Biomedical Science and Engineering · 2021 · 14 (02) · 33-47
DOI: 10.4236/jbise.2021.142005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Science and Engineering, 2021. Verfasst von Jie Cheng und 1 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, a finite element simulation of in-stent restenosis (ISR) is conducted to simulate the deployment and expansion of a stent in an occluded artery with a contact model and a mechanics-based growth model. A tissue growth model based on the multiplicative decomposition of deformation is applied to investigate the growth of the plaque and artery wall upon the stent’s implantation. Due to the high stresses at the contact points between the stent struts and the tissue, further tissue injury or restenosis is observed. The simulation results show that after the stent deployment, the von Mises stress is significantly larger in the plaque compared to the artery wall, especially in the region that is in contact with the stent. However, the growth of the plaque and artery tends to even out the stress concentration over time. The tissue growth is found to be more significant near the inner wall than the outer layer. A 0.77 mm restenosis is predicted, which agrees with published clinical observations. The features of the artery growth are carefully analyzed, and the underlying mechanism is discussed. This study is the first attempt to apply finite element analysis to artery restenosis, which establishes a framework for predicting ISR’s occurrence and severity. The results also provide insights into understanding the underlying mechanism of in-stent restenosis.
Zitieren
APA
Cheng, J., & Zhang, L. T. (2021). Finite Element Simulation of In-Stent Restenosis with Tissue Growth Model. Journal of Biomedical Science and Engineering, 14(02), 33-47. https://doi.org/10.4236/jbise.2021.142005
Vancouver
Cheng J, Zhang LT. Finite Element Simulation of In-Stent Restenosis with Tissue Growth Model. Journal of Biomedical Science and Engineering. 2021;14(02):33-47. doi:10.4236/jbise.2021.142005
BibTeX
@article{Cheng2021,
author = {Cheng, Jie and Zhang, Lucy T.},
title = {Finite Element Simulation of In-Stent Restenosis with Tissue Growth Model},
journal = {Journal of Biomedical Science and Engineering},
year = {2021},
volume = {14},
number = {02},
pages = {33--47},
doi = {10.4236/jbise.2021.142005}
}
EUVIMED