Weightlifting Motion Generation for a Stance Robot with Repeatedly Direct Kinematics
Intelligent Control and Automation · 2010
DOI: 10.4236/ica.2010.11003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Intelligent Control and Automation, 2010. Verfasst von Jining Liu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research focuses on how to control the robot easily and how to generate the better trajectories of the robot with multiple joints to implement weightlifting motion. The purpose of this research is to develop a multijoint robot can stand up successfully with an object. This research requires the operations with two items. First, when the object is lifted up slowly, the robot could stand up as easily as possible and does not tumble down. Second, the load applied on each joint should be as small as possible. In this article, a motion control method is proposed to evaluate the variations of the load torque and rotated angle of each joint with the geometrical constraints in the procedure and find the best algorithm to generate the trajectory of a weightlifting motion by a stance robot with repeatedly direct kinematics.
Zitieren
APA
Liu, J., Kamiya, Y., Seki, H., & Hikizu, M. (2010). Weightlifting Motion Generation for a Stance Robot with Repeatedly Direct Kinematics. Intelligent Control and Automation. https://doi.org/10.4236/ica.2010.11003
Vancouver
Liu J, Kamiya Y, Seki H, Hikizu M. Weightlifting Motion Generation for a Stance Robot with Repeatedly Direct Kinematics. Intelligent Control and Automation. 2010. doi:10.4236/ica.2010.11003
BibTeX
@article{Liu2010,
author = {Liu, Jining and Kamiya, Yoshitsugu and Seki, Hiroaki and Hikizu, Masatoshi},
title = {Weightlifting Motion Generation for a Stance Robot with Repeatedly Direct Kinematics},
journal = {Intelligent Control and Automation},
year = {2010},
doi = {10.4236/ica.2010.11003}
}
EUVIMED