Effect of Low-Oxygen Atmosphere Sintering on TiO2 Powder Photoanodes for Fiber-Shaped Dye-Sensitized Solar Cells toward Carbon-Based Electrode Integration.
Journal of Powder Materials · 31.10.2026 · 33 (5) · 327-337
DOI: 10.4150/jpm.2026.00241 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 31.10.2026. Verfasst von Yeonggwon Kim und 7 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Pusan National University.
Abstract (Originalsprache)
Motivated by the goal of achieving high-temperature photoanode processing compatible with carbon-based current collectors, this study investigates the effect of sintering atmosphere on Ti wire/TiO2 photoanodes for fiber-shaped dye-sensitized solar cells. Photoanodes sintered under conventional air (Air) and a custom low-oxygen condition (LO, continuous Ar flow under reduced pressure at 500 °C) were compared, along with a subsequent low-temperature air-annealing treatment (LO-A). X-ray diffraction (XRD) and scanning electron microscopy (SEM) revealed no substantial difference between Air and LO, whereas X-ray photoelectron spectroscopy (XPS) showed a marked increase in reduced Ti species (Ti3+, Ti2+) and an approximately twofold higher C 1s signal for LO, accompanied by significantly reduced N719 dye adsorption. LO photoanodes exhibited short-circuit-like device behavior, precluding reliable photovoltaic characterization. Although LO-A eliminated this short-circuit behavior and largely restored dye adsorption, photovoltaic performance remained severely suppressed, and electrochemical impedance spectroscopy revealed a three-orders-of-magnitude increase in photoanode-related charge-transfer resistance relative to Air. These results indicate that dye-anchoring capacity and interfacial charge-transfer resistance are governed by at least partially distinct factors, possibly involving reduced Ti species, carbon residue, and leakage paths, whose contributions were not separated, and that low-temperature annealing alone is insufficient to restore the photoelectrochemical functionality compromised by LO sintering.
Förderung
- Pusan National University
Zitieren
APA
Kim, Y., Woo, C. Y., Kim, S. M., Park, J., Jeong, Y., Chun, D., Jeong, S., & Lee, H. W. (2026). Effect of Low-Oxygen Atmosphere Sintering on TiO2 Powder Photoanodes for Fiber-Shaped Dye-Sensitized Solar Cells toward Carbon-Based Electrode Integration. Journal of Powder Materials, 33(5), 327-337. https://doi.org/10.4150/jpm.2026.00241
Vancouver
Kim Y, Woo CY, Kim SM, Park J, Jeong Y, Chun D, et al. Effect of Low-Oxygen Atmosphere Sintering on TiO2 Powder Photoanodes for Fiber-Shaped Dye-Sensitized Solar Cells toward Carbon-Based Electrode Integration. Journal of Powder Materials. 2026;33(5):327-337. doi:10.4150/jpm.2026.00241
BibTeX
@article{Kim2026,
author = {Kim, Yeonggwon and Woo, Chae Young and Kim, Sung Min and Park, Jiseong and Jeong, Yongseon and Chun, Dabin and Jeong, Seungfeel and Lee, Hyung Woo},
title = {Effect of Low-Oxygen Atmosphere Sintering on TiO2 Powder Photoanodes for Fiber-Shaped Dye-Sensitized Solar Cells toward Carbon-Based Electrode Integration},
journal = {Journal of Powder Materials},
year = {2026},
volume = {33},
number = {5},
pages = {327--337},
doi = {10.4150/jpm.2026.00241}
}
EUVIMED