Microstructural Characteristics and High-Temperature Compression Behavior of a Ni-Based ODS-Composition Alloy and Refractory Composite
Journal of Powder Materials · 31.10.2026 · 33 (5) · 365-371
DOI: 10.4150/jpm.2026.00234 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 31.10.2026. Verfasst von Song-Yi Kim und 3 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
Nickel-based alloys have been widely used as high-temperature structural materials owing to their excellent oxidation resistance, phase stability, and mechanical reliability. However, their mechanical properties can rapidly deteriorate under ultrahigh-temperature conditions due to thermally activated dislocation motion, dynamic recovery, and grain-boundary-mediated deformation. Therefore, introducing thermally stable refractory constituents that retain high strength at elevated temperatures may provide an effective strategy for overcoming this limitation. In this study, Nb-Si-Ti-based refractory silicide alloy powder and Mo-based refractory alloy powder were introduced as reinforcing constituents to improve the ultrahigh-temperature deformation resistance of a Ni-based ODS-composition alloy. A Ni-MRC composite was fabricated by spark plasma sintering. The composite powder consisted of 65 wt.% Ni-based ODS-composition alloy powder, 25 wt.% Nb-Si-Ti-based refractory silicide alloy powder, and 10 wt.% Mo-based refractory alloy powder. Powder morphology, phase constitution, SPS-consolidated microstructure and ultrahigh-temperature compression behavior at 1050 °C were analyzed using SEM, XRD, EBSD, and Gleeble-based compression testing to evaluate the role of refractory reinforcements in improving the deformation resistance of the Ni-based matrix. The Ni-MRC composite exhibited a peak stress of 221 MPa at 1050 ℃, approximately 106% higher than that of the Ni-based ODS-composition alloy, indicating improved ultrahigh-temperature deformation resistance.
Förderung
- National Research Foundation of Korea
Zitieren
APA
Kim, S., Kwon, D., Cha, E., & Kim, H. (2026). Microstructural Characteristics and High-Temperature Compression Behavior of a Ni-Based ODS-Composition Alloy and Refractory Composite. Journal of Powder Materials, 33(5), 365-371. https://doi.org/10.4150/jpm.2026.00234
Vancouver
Kim S, Kwon D, Cha E, Kim H. Microstructural Characteristics and High-Temperature Compression Behavior of a Ni-Based ODS-Composition Alloy and Refractory Composite. Journal of Powder Materials. 2026;33(5):365-371. doi:10.4150/jpm.2026.00234
BibTeX
@article{Kim2026,
author = {Kim, Song-Yi and Kwon, Do-Hun and Cha, Eun-Ji and Kim, Hwi-Jun},
title = {Microstructural Characteristics and High-Temperature Compression Behavior of a Ni-Based ODS-Composition Alloy and Refractory Composite},
journal = {Journal of Powder Materials},
year = {2026},
volume = {33},
number = {5},
pages = {365--371},
doi = {10.4150/jpm.2026.00234}
}
EUVIMED