Microstructure, Magnetic Properties, and Performance of Fe-6.5Si Soft Magnetic Core Produced by Laser Powder Bed Fusion
Journal of Powder Materials · 30.06.2026 · 33 (3) · 177-183
DOI: 10.4150/jpm.2026.00094 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 30.06.2026. Verfasst von Ji Sang Yoon und 7 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Korea Institute of Materials Science, National Research Foundation of Korea, Ministry of Trade, Industry and Energy of Korean government.
Abstract (Originalsprache)
High-silicon electrical steels containing 6.5 wt.% Si (Fe-6.5Si) are promising materials for high-efficiency electric motors because of their high electrical resistivity and low core loss. However, the intrinsic brittleness of high-silicon steels limits their formability using conventional fabrication methods, such as cold rolling, pressure forming, and sintering, making it difficult to fabricate three-dimensional (3D) soft magnetic cores for axial-flux permanent magnet (AFPM) motors. Additive manufacturing has recently attracted attention as an effective approach for producing complex magnetic components. In particular, laser powder bed fusion (LPBF) enables the fabrication of geometrically complex structures through localized melting and rapid solidification of metal powders. During LPBF, rapid thermal cycling can generate unique microstructures that influence the magnetic properties of fabricated materials. In this study, Fe-6.5Si samples were fabricated using LPBF, and their microstructure and magnetic properties were investigated. In addition, a complex-shaped 3D core was successfully fabricated by LPBF, and the performance of an AFPM motor equipped with the LPBF-fabricated core was evaluated. The results show that the LPBF-fabricated core can provide superior performance-to-weight efficiency for lightweight motor applications.
Förderung
- Korea Institute of Materials Science
- National Research Foundation of Korea
- Ministry of Trade, Industry and Energy of Korean government
Zitieren
APA
Yoon, J. S., Kim, Y. W., Park, G. H., Kim, Y. J., Lee, S. H., Kim, J. S., Yu, S. H., & Park, J. M. (2026). Microstructure, Magnetic Properties, and Performance of Fe-6.5Si Soft Magnetic Core Produced by Laser Powder Bed Fusion. Journal of Powder Materials, 33(3), 177-183. https://doi.org/10.4150/jpm.2026.00094
Vancouver
Yoon JS, Kim YW, Park GH, Kim YJ, Lee SH, Kim JS, et al. Microstructure, Magnetic Properties, and Performance of Fe-6.5Si Soft Magnetic Core Produced by Laser Powder Bed Fusion. Journal of Powder Materials. 2026;33(3):177-183. doi:10.4150/jpm.2026.00094
BibTeX
@article{Yoon2026,
author = {Yoon, Ji Sang and Kim, Yeon Woo and Park, Gyu Hyun and Kim, Youk Jin and Lee, Sang Heon and Kim, Jeong Seok and Yu, Sung Ho and Park, Jeong Min},
title = {Microstructure, Magnetic Properties, and Performance of Fe-6.5Si Soft Magnetic Core Produced by Laser Powder Bed Fusion},
journal = {Journal of Powder Materials},
year = {2026},
volume = {33},
number = {3},
pages = {177--183},
doi = {10.4150/jpm.2026.00094}
}
EUVIMED