EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effect of Compositional Trade-off Between Cr and Mo on the Corrosion Resistance of Additively Manufactured Co-Cr-Fe-Ni-Mo High-Entropy Alloys

Jeongmin Lee, Yeonghwan Song, Jae Hyuk Lee, Sung-Jae Jo, Minho Shin, Hyunbin Lim, Soon-Jik Hong, Soo-Hyun Joo

Journal of Powder Materials · 30.04.2026 · 33 (2) · 137-144

DOI: 10.4150/jpm.2026.00087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 30.04.2026. Verfasst von Jeongmin Lee und 7 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministry of Trade, Industry and Energy, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the corrosion behavior of Co-Cr-Fe-Ni-Mo high-entropy alloys additively manufactured via direct energy deposition was investigated according to the compositional trade-off between Cr and Mo elements. Two distinct alloy compositions were fabricated by adjusting the feeding rate of two powders with different chemical compositions through a dual nozzle. Electrochemical testing in a 3.5 wt% NaCl solution revealed that the Cr-rich and Mo-lean alloy exhibited inferior corrosion resistance compared to the Cr-lean and Mo-rich alloy. Specifically, the corrosion potential of the Cr-rich and Mo-lean alloy shifted negatively by approximately 200 mV compared to the Cr-lean and Mo-rich alloy, accompanied by an increase in corrosion current density and the pronounced initiation of localized pitting. This deterioration is attributed to a lack of passivation caused by the small amount of Mo in the Cr-rich and Mo-lean alloy. The passive film of the Cr-lean and Mo-rich alloy was more robust, characterized by a higher concentration of Mo, which effectively inhibited pit propagation through repassivation. These findings demonstrate that maintaining a critical Cr-Mo balance is more vital for the electrochemical stability of additively manufactured high-entropy alloys than unilateral Cr enrichment.

Förderung

  • Ministry of Trade, Industry and Energy
  • National Research Foundation of Korea

Zitieren

APA

Lee, J., Song, Y., Lee, J. H., Jo, S., Shin, M., Lim, H., Hong, S., & Joo, S. (2026). Effect of Compositional Trade-off Between Cr and Mo on the Corrosion Resistance of Additively Manufactured Co-Cr-Fe-Ni-Mo High-Entropy Alloys. Journal of Powder Materials, 33(2), 137-144. https://doi.org/10.4150/jpm.2026.00087

Vancouver

Lee J, Song Y, Lee JH, Jo S, Shin M, Lim H, et al. Effect of Compositional Trade-off Between Cr and Mo on the Corrosion Resistance of Additively Manufactured Co-Cr-Fe-Ni-Mo High-Entropy Alloys. Journal of Powder Materials. 2026;33(2):137-144. doi:10.4150/jpm.2026.00087

BibTeX
@article{Lee2026,
  author = {Lee, Jeongmin and Song, Yeonghwan and Lee, Jae Hyuk and Jo, Sung-Jae and Shin, Minho and Lim, Hyunbin and Hong, Soon-Jik and Joo, Soo-Hyun},
  title = {Effect of Compositional Trade-off Between Cr and Mo on the Corrosion Resistance of Additively Manufactured Co-Cr-Fe-Ni-Mo High-Entropy Alloys},
  journal = {Journal of Powder Materials},
  year = {2026},
  volume = {33},
  number = {2},
  pages = {137--144},
  doi = {10.4150/jpm.2026.00087}
}
Kostenlos starten →