EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effect of Bimodal WC Particle Size Distribution on the Mechanical Properties of WC–Mo2C–Co Cemented Carbides

Jinwoo Seok, Jong Tae Kim, Juree Jung, Bin Lee, Junhee Han, Leeseung Kang

Journal of Powder Materials · 28.02.2026 · 33 (1) · 13-21

DOI: 10.4150/jpm.2025.00500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 28.02.2026. Verfasst von Jinwoo Seok und 5 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministry of Trade Industry & Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the influence of bimodal WC particle size design on the microstructure and mechanical properties of WC–27 wt.% Mo₂C–10 wt.% Co cemented carbides was systematically investigated. Bimodal hard-phase designs were realized by combining ultrafine WC (300 nm) and coarse WC (1.8 μm) at various ratios, followed by consolidation via spark plasma sintering (SPS). During sintering, Mo₂C preferentially dissolved into the Co-rich liquid phase due to its higher solubility than WC, forming a Co–Mo–C liquid. During sintering progresses, ultrafine WC selectively dissolved owing to its high interfacial energy, gradually transforming the liquid composition into a Co–Mo–W–C system. Owing to the short holding time and rapid cooling rate of SPS, the η-phase (M₆C) formed during sintering remained metastable. Meanwhile, selective dissolution–reprecipitation resulted in the formation of Mo₂C-based core–rim structures with W enrichment in the rim region as (Mo, W)₂C. As the fraction of ultrafine WC increased, the hardness increased from 1769 to 1997 kgf/mm2, whereas the fracture toughness exhibited an insignificant difference from 6.56 to 6.65 MPa•m¹ᐟ². Fracture behavior analysis revealed that crack deflection and crack bridging occurred at the Mo₂C core–rim interfaces, effectively suppressing straight crack propagation. These results demonstrate that the introduction of ultrafine WC plays a dominant role in enhancing mechanical performance, and that bimodal WC design combined with Mo₂C addition is a highly effective strategy for developing high-performance cemented carbides for machining

Förderung

  • Ministry of Trade Industry & Energy

Zitieren

APA

Seok, J., Kim, J. T., Jung, J., Lee, B., Han, J., & Kang, L. (2026). Effect of Bimodal WC Particle Size Distribution on the Mechanical Properties of WC–Mo2C–Co Cemented Carbides. Journal of Powder Materials, 33(1), 13-21. https://doi.org/10.4150/jpm.2025.00500

Vancouver

Seok J, Kim JT, Jung J, Lee B, Han J, Kang L. Effect of Bimodal WC Particle Size Distribution on the Mechanical Properties of WC–Mo2C–Co Cemented Carbides. Journal of Powder Materials. 2026;33(1):13-21. doi:10.4150/jpm.2025.00500

BibTeX
@article{Seok2026,
  author = {Seok, Jinwoo and Kim, Jong Tae and Jung, Juree and Lee, Bin and Han, Junhee and Kang, Leeseung},
  title = {Effect of Bimodal WC Particle Size Distribution on the Mechanical Properties of WC–Mo2C–Co Cemented Carbides},
  journal = {Journal of Powder Materials},
  year = {2026},
  volume = {33},
  number = {1},
  pages = {13--21},
  doi = {10.4150/jpm.2025.00500}
}
Kostenlos starten →