Study on the Elemental Diffusion Distance of a Pure Nickel Layer Additively Manufactured on 316H Stainless Steel
journal of Korean Powder Metallurgy Institute · 2024
DOI: 10.4150/jpm.2024.00164 ↗Kurz gefasst
Fachartikel in der Zeitschrift journal of Korean Powder Metallurgy Institute, 2024. Verfasst von UiJun Ko und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Korea Research Institute for Defense Technology Planning and Advancement.
Abstract (Originalsprache)
Molten salt reactors represent a promising advancement in nuclear technology due to their potential for enhanced safety, higher efficiency, and reduced nuclear waste. However, the development of structural materials that can survive under severe corrosion environments is crucial. In the present work, pure Ni was deposited on the surface of 316H stainless steel using a directed energy deposition (DED) process. This study aimed to fabricate pure Ni alloy layers on an STS316H alloy substrate. It was observed that low laser power during the deposition of pure Ni on the STS316H substrate could induce stacking defects such as surface irregularities and internal voids, which were confirmed through photographic and SEM analyses. Additionally, the diffusion of Fe and Cr elements from the STS316H substrate into the Ni layers was observed to decrease with increasing Ni deposition height. Analysis of the composition of Cr and Fe components within the Ni deposition structures allows for the prediction of properties such as the corrosion resistance of Ni.
Förderung
- Korea Research Institute for Defense Technology Planning and Advancement
Zitieren
APA
Ko, U., Lee, W. C., Shin, G. S., Yoon, J., & Kim, J. H. (2024). Study on the Elemental Diffusion Distance of a Pure Nickel Layer Additively Manufactured on 316H Stainless Steel. journal of Korean Powder Metallurgy Institute. https://doi.org/10.4150/jpm.2024.00164
Vancouver
Ko U, Lee WC, Shin GS, Yoon J, Kim JH. Study on the Elemental Diffusion Distance of a Pure Nickel Layer Additively Manufactured on 316H Stainless Steel. journal of Korean Powder Metallurgy Institute. 2024. doi:10.4150/jpm.2024.00164
BibTeX
@article{Ko2024,
author = {Ko, UiJun and Lee, Won Chan and Shin, Gi Seung and Yoon, Ji-Hyun and Kim, Jeoung Han},
title = {Study on the Elemental Diffusion Distance of a Pure Nickel Layer Additively Manufactured on 316H Stainless Steel},
journal = {journal of Korean Powder Metallurgy Institute},
year = {2024},
doi = {10.4150/jpm.2024.00164}
}
EUVIMED