Characterization of the Manufacturing Process and Mechanical Properties of CoCrFeMnNi High-Entropy Alloys via Metal Injection Molding and Hot Isostatic Pressing
journal of Korean Powder Metallurgy Institute · 2024
DOI: 10.4150/jpm.2024.00059 ↗Kurz gefasst
Fachartikel in der Zeitschrift journal of Korean Powder Metallurgy Institute, 2024. Verfasst von Eun Seong Kim und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200°C, 1250°C, and 1275°C. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150°C) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275°C MIM process. The HIP process can improve the quality of the alloy.
Förderung
- National Research Foundation of Korea
Zitieren
APA
Kim, E. S., Park, J. M., Lee, D. W., Ha, H., Choe, J., Wang, J., Park, S. J., Lee, B., & Kim, H. S. (2024). Characterization of the Manufacturing Process and Mechanical Properties of CoCrFeMnNi High-Entropy Alloys via Metal Injection Molding and Hot Isostatic Pressing. journal of Korean Powder Metallurgy Institute. https://doi.org/10.4150/jpm.2024.00059
Vancouver
Kim ES, Park JM, Lee DW, Ha H, Choe J, Wang J, et al. Characterization of the Manufacturing Process and Mechanical Properties of CoCrFeMnNi High-Entropy Alloys via Metal Injection Molding and Hot Isostatic Pressing. journal of Korean Powder Metallurgy Institute. 2024. doi:10.4150/jpm.2024.00059
BibTeX
@article{Kim2024,
author = {Kim, Eun Seong and Park, Jae Man and Lee, Do Won and Ha, Hyojeong and Choe, Jungho and Wang, Jaemin and Park, Seong Jin and Lee, Byeong-Joo and Kim, Hyoung Seop},
title = {Characterization of the Manufacturing Process and Mechanical Properties of CoCrFeMnNi High-Entropy Alloys via Metal Injection Molding and Hot Isostatic Pressing},
journal = {journal of Korean Powder Metallurgy Institute},
year = {2024},
doi = {10.4150/jpm.2024.00059}
}
EUVIMED