The Effect of TiO2 Addition on Low-temperature Sintering Behaviors in a SnO2-CoO-CuO System
journal of Korean Powder Metallurgy Institute · 2024
DOI: 10.4150/jpm.2024.00024 ↗Kurz gefasst
Fachartikel in der Zeitschrift journal of Korean Powder Metallurgy Institute, 2024. Verfasst von Jae-Sang Lee und 2 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Andong National University.
Abstract (Originalsprache)
Pure SnO2 has proven very difficult to densify. This poor densification can be useful for the fabrication of SnO2 with a porous microstructure, which is used in electronic devices such as gas sensors. Most electronic devices based on SnO2 have a porous microstructure, with a porosity of > 40%. In pure SnO2, a high sintering temperature of approximately 1300C is required to obtain > 40% porosity. In an attempt to reduce the required sintering temperature, the present study investigated the low-temperature sinterability of a current system. With the addition of TiO2, the compositions of the samples were Sn1-xTixO2-CoO(0.3wt%)-CuO(2wt%) in the range of x ≤ 0.04. Compared to the samples without added TiO2, densification was shown to be improved when the samples were sintered at 950C. The dominant mass transport mechanism appears to be grain-boundary diffusion during heat treatment at 950C.
Förderung
- Andong National University
Zitieren
APA
Lee, J., Oh, K., & Paek, Y. (2024). The Effect of TiO2 Addition on Low-temperature Sintering Behaviors in a SnO2-CoO-CuO System. journal of Korean Powder Metallurgy Institute. https://doi.org/10.4150/jpm.2024.00024
Vancouver
Lee J, Oh K, Paek Y. The Effect of TiO2 Addition on Low-temperature Sintering Behaviors in a SnO2-CoO-CuO System. journal of Korean Powder Metallurgy Institute. 2024. doi:10.4150/jpm.2024.00024
BibTeX
@article{Lee2024,
author = {Lee, Jae-Sang and Oh, Kyung-Sik and Paek, Yeong-Kyeun},
title = {The Effect of TiO2 Addition on Low-temperature Sintering Behaviors in a SnO2-CoO-CuO System},
journal = {journal of Korean Powder Metallurgy Institute},
year = {2024},
doi = {10.4150/jpm.2024.00024}
}
EUVIMED