Effect of Ball Milling Conditions on the Microstructure and Dehydrogenation Behavior of TiH2 Powder
journal of Korean Powder Metallurgy Institute · 2024
DOI: 10.4150/jpm.2024.00001 ↗Kurz gefasst
Fachartikel in der Zeitschrift journal of Korean Powder Metallurgy Institute, 2024. Verfasst von Ji Young Kim und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
This study investigated the effects of revolution speed and ball size in planetary milling on the microstructure and dehydrogenation behavior of TiH2 powder. The particle size analysis showed that the large particles present in the raw powder were effectively refined as the revolution speed increased, and when milled at 500 rpm, the median particle size was 1.47 m. Milling with a mixture of balls of two or three sizes was more effective in refining the raw powder than milling with balls of a single size. A mixture of 3-mm and 5-mm-diameter balls was the optimal condition for particle refinement, and the measured median particle size was 0.71 m. The dependence of particle size on revolution speed and ball size was explained by changes in input energy and the number of contact points of the balls. In the milled powder, the endothermic peak measured using differential thermal analysis was observed at a relatively low temperature. This finding was interpreted as the activation of a dehydrogenation reaction, mainly due to the increase in the specific surface area and the concentration of lattice defects.
Förderung
- National Research Foundation of Korea
Zitieren
APA
Kim, J. Y., Lee, E. S., Choi, J. W., Kim, Y., & Oh, S. (2024). Effect of Ball Milling Conditions on the Microstructure and Dehydrogenation Behavior of TiH2 Powder. journal of Korean Powder Metallurgy Institute. https://doi.org/10.4150/jpm.2024.00001
Vancouver
Kim JY, Lee ES, Choi JW, Kim Y, Oh S. Effect of Ball Milling Conditions on the Microstructure and Dehydrogenation Behavior of TiH2 Powder. journal of Korean Powder Metallurgy Institute. 2024. doi:10.4150/jpm.2024.00001
BibTeX
@article{Kim2024,
author = {Kim, Ji Young and Lee, Eui Seon and Choi, Ji Won and Kim, Youngmin and Oh, Sung-Tag},
title = {Effect of Ball Milling Conditions on the Microstructure and Dehydrogenation Behavior of TiH2 Powder},
journal = {journal of Korean Powder Metallurgy Institute},
year = {2024},
doi = {10.4150/jpm.2024.00001}
}
EUVIMED