EUVIMEDEUVIMED entdecken
Crossref

Marine SP Surveys for Dam Seepage Investigations: Evaluation of Array Geometries through Modeling and Field Trials

John Jansen, Ned Billington, Fred Snider, Patrick Jurcek

Journal of Environmental & Engineering Geophysics · 01.04.1996 · 1 (1) · 37-45

DOI: 10.4133/jeeg1.1.37 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Environmental & Engineering Geophysics, erschienen am 01.04.1996. Verfasst von John Jansen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Marine spontaneous potential (SP) surveys have been used on reservoirs for several decades. Most surveys have used gradient arrays towed at the surface or at some depth in the water column. Water column gradient arrays are efficient, but at the cost of some sensitivity. Other surveys have used a single fixed electrode and a roving electrode dragged across the reservoir bottom. These surveys have typically been labor intensive and logistically limited. Finite difference models and field trials were used to evaluate the sensitivity and field productivity of gradient arrays and roving electrode arrays, in the water column and on the reservoir floor, for detecting narrow seepage pathways in a large reservoir. The pre-survey finite-difference models suggested the greatest sensitivity would be achieved with the electrodes at the sediment-water interface. The gradient array models produced a bipolar anomaly with the spacing between the spikes equal to the electrode spacing. The single roving electrode models produced the sharpest, most easily interpreted anomalies. Single roving electrode and gradient arrays were field tested. Several electrode coupling modes were tested, including electrodes suspended at different heights in the water column, mechanically planted in the sediment, and dragged across the sediment (benthic arrays). The field trials demonstrated that physical coupling between the electrodes and the sediment significantly improved survey results. Benthic gradient arrays were most suitable for reconnaissance surveys. Benthic single roving electrode arrays were most suitable for detailed surveys in areas of suspected seepage features. The field trials were followed by two production surveys using a benthic single roving electrode array. The surveys successfully mapped seepage paths under the clay liner of the reservoir. The detected anomalies were generally less than 3 meters wide, which made high spatial sampling density and accurate position control critically important.

Zitieren

APA

Jansen, J., Billington, N., Snider, F., & Jurcek, P. (1996). Marine SP Surveys for Dam Seepage Investigations: Evaluation of Array Geometries through Modeling and Field Trials. Journal of Environmental & Engineering Geophysics, 1(1), 37-45. https://doi.org/10.4133/jeeg1.1.37

Vancouver

Jansen J, Billington N, Snider F, Jurcek P. Marine SP Surveys for Dam Seepage Investigations: Evaluation of Array Geometries through Modeling and Field Trials. Journal of Environmental & Engineering Geophysics. 1996;1(1):37-45. doi:10.4133/jeeg1.1.37

BibTeX
@article{Jansen1996,
  author = {Jansen, John and Billington, Ned and Snider, Fred and Jurcek, Patrick},
  title = {Marine SP Surveys for Dam Seepage Investigations: Evaluation of Array Geometries through Modeling and Field Trials},
  journal = {Journal of Environmental & Engineering Geophysics},
  year = {1996},
  volume = {1},
  number = {1},
  pages = {37--45},
  doi = {10.4133/jeeg1.1.37}
}
Kostenlos starten →