EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Evaluation of the Accuracy of Intraoral Digital Impression Systems and CAD and CAM Workflows for Fabricating Dental Prostheses

Ojas Anand Gajbhiye, M Pradeep Reddy, Md Imran, Nikhita Narayanan, Praveen Gangadharappa, Harisha Dewan

Journal of Pharmacy and Bioallied Sciences · 2024-12 · 16 (Suppl 4) · S3734-S3736

DOI: 10.4103/jpbs.jpbs_1180_24 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Pharmacy and Bioallied Sciences, online erschienen am 12.12.2024. Verfasst von Ojas Anand Gajbhiye und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Ranjeet Deshmukh Dental College and Research Centre, Digdoh Hills, Hingna, Nagpur, Maharashtra, India. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A BSTRACT Background: Dental prosthesis manufacturing has undergone a radical change with the introduction of intraoral digital impression technologies and computer-aided design and computer-aided manufacturing (CAD and CAM) processes. Investigations into these systems’ accuracy in creating dental restorations that adhere to clinical standards are still underway. Materials and Methods: For this investigation, a total of 60 patients in need of single-unit crowns were chosen. They were divided into three groups of 20: Group A used intraoral digital impression systems, Group B used conventional impression procedures, and Group C combined digital impressions with CAD and CAM processes. The marginal fit and internal fit of the crowns were compared to assess the correctness of the dental prosthesis. A stereomicroscope was used to evaluate the marginal fit, and micro-CT imaging was employed to analyze the interior fit. ANOVA and Tukey’s post hoc test were used to examine the data, with a significance threshold of P < 0.05.

Results

The mean marginal fit was 120 ± 15 μm for Group A, 80 ± 10 μm for Group B, and 75 ± 8 μm for Group C, according to the data. The internal fit values were 150 ± 20 μm for Group A, 90 ± 12 μm for Group B, and 85 ± 10 μm for Group C. According to statistical analysis, Group B and Group C outperformed Group A in terms of accuracy in both internal and marginal fits ( P < 0.01). There was no discernible difference between Group B and Group C.

Conclusion

When constructing dental prostheses, intraoral digital impression technologies and CAD and CAM workflows show better accuracy over conventional impression techniques. The greatest clinical results are obtained when digital impressions and CAD and CAM workflows are combined, indicating that these technologies need to be accepted as routine procedures in prosthetic dentistry.

Schlagwörter

Stichwörter der Autor:innen

AccuracyCAD and CAMdental prosthesesdigital dentistryinternal fitintraoral digital impressionmarginal fit

Autor:innen und Institutionen

  • Department of Prosthodontics, Ranjeet Deshmukh Dental College and Research Centre, Digdoh Hills, Hingna, Nagpur, Maharashtra, India.
  • Department of Prosthodontics, Buddha Institute of Dental Sciences, Patna, Bihar, India.
  • Department of Dentistry, Patna Medical College and Hospital, Ashok Raj Path, Bihar, India.
  • Department of Prosthodontics and Crown and Bridge, Kannur Dental College, Anjarakandy Integrated Campus, Anjarakandy, Kannur, Kerala, India.
  • Department of Prosthetic Dental Sciences, College of Dentistry, Shawajra Campus, Jazan University, Jazan, KSA.

Zitieren

APA

Gajbhiye, O. A., Reddy, M. P., Imran, M., Narayanan, N., Gangadharappa, P., & Dewan, H. (2024). Evaluation of the Accuracy of Intraoral Digital Impression Systems and CAD and CAM Workflows for Fabricating Dental Prostheses. Journal of Pharmacy and Bioallied Sciences, 16(Suppl 4), S3734-S3736. https://doi.org/10.4103/jpbs.jpbs_1180_24

Vancouver

Gajbhiye OA, Reddy MP, Imran M, Narayanan N, Gangadharappa P, Dewan H. Evaluation of the Accuracy of Intraoral Digital Impression Systems and CAD and CAM Workflows for Fabricating Dental Prostheses. Journal of Pharmacy and Bioallied Sciences. 2024;16(Suppl 4):S3734-S3736. doi:10.4103/jpbs.jpbs_1180_24

BibTeX
@article{Gajbhiye2024,
  author = {Gajbhiye, Ojas Anand and Reddy, M Pradeep and Imran, Md and Narayanan, Nikhita and Gangadharappa, Praveen and Dewan, Harisha},
  title = {Evaluation of the Accuracy of Intraoral Digital Impression Systems and CAD and CAM Workflows for Fabricating Dental Prostheses},
  journal = {Journal of Pharmacy and Bioallied Sciences},
  year = {2024},
  volume = {16},
  number = {Suppl 4},
  pages = {S3734--S3736},
  doi = {10.4103/jpbs.jpbs_1180_24}
}
Kostenlos starten →