Comparative evaluation of 2-step and 3-step polishing systems on the surface roughness and flexural strength of lithium disilicate: An in vitro study
The Journal of Indian Prosthodontic Society · 2026-07 · 26 (3) · 238-244
DOI: 10.4103/jips.jips_608_25 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift The Journal of Indian Prosthodontic Society, online erschienen am 01.07.2026. Verfasst von Rawan Abdullah Suliman Alrethia und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dental Sciences, College of Dentistry, Qassim University, Buraydah, Saudi Arabia. Hauptthemen laut MEDLINE: Dental Porcelain, Flexural Strength, Dental Polishing. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Aim
The aim of this in vitro study was to investigate the effects of 2-step and 3-step polishing systems on the surface roughness and biaxial flexural strength of lithium disilicate ceramics after grinding. Settings and Design: Thirty-two 14 x 1.25 mm lithium disilicate (IPS e.max CAD) discs were divided into four groups ( n = 8): control (unmodified), ground-unpolished, ground-3-step polished (Shofu Zil Master), and ground-2-step polished (Toboom). A profilometer was used to quantify the surface roughness (Ra, µm), and ISO 6872 was followed to calculate the biaxial flexural strength (MPa). Materials and Methods: A profilometer was used to quantify the surface roughness (Ra, µm), and ISO 6872 was followed to calculate the biaxial flexural strength (MPa) of all the samples. Statistical Analysis Used: The data were analyzed through the IBM SPSS Statistics software package (Version 25.0). One-way Analysis of Variance (ANOVA) was used to check variations among the groups followed by the Tukey’s post hoc test (α=.05).
Results
There were significant differences between the groups in both flexural strength and surface roughness ( P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Prosthetic Dental Sciences, College of Dentistry, Qassim University, Buraydah, Saudi Arabia.
- B.D.S, College of Dentistry, Qassim University, Buraydah, Saudi Arabia.
- Department of Prosthodontics, Rural Dental College, Pravara Institute of Medical Sciences, Ahmednagar, Maharashtra, India.
- Dental Intern, College of Dentistry, Qassim University, Buraydah, Saudi Arabia.
Zitieren
APA
Alrethia, R. A. S., Alghofaili, M. M. S., Barakat, M. M. A., Awinashe, V., Komalan, A., & Alhablen, A. A. (2026). Comparative evaluation of 2-step and 3-step polishing systems on the surface roughness and flexural strength of lithium disilicate: An in vitro study. The Journal of Indian Prosthodontic Society, 26(3), 238-244. https://doi.org/10.4103/jips.jips_608_25
Vancouver
Alrethia RAS, Alghofaili MMS, Barakat MMA, Awinashe V, Komalan A, Alhablen AA. Comparative evaluation of 2-step and 3-step polishing systems on the surface roughness and flexural strength of lithium disilicate: An in vitro study. The Journal of Indian Prosthodontic Society. 2026;26(3):238-244. doi:10.4103/jips.jips_608_25
BibTeX
@article{Alrethia2026,
author = {Alrethia, Rawan Abdullah Suliman and Alghofaili, Meshal Mohamed Suliman and Barakat, Moataz Mohamed Amin and Awinashe, Vaibhav and Komalan, Ashwini and Alhablen, Abdullah Abdulaziz},
title = {Comparative evaluation of 2-step and 3-step polishing systems on the surface roughness and flexural strength of lithium disilicate: An in vitro study},
journal = {The Journal of Indian Prosthodontic Society},
year = {2026},
volume = {26},
number = {3},
pages = {238--244},
doi = {10.4103/jips.jips_608_25}
}
EUVIMED