EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY-NC-ND 4.0

Effects of chemical surface treatments on the shear bond strength between polyetheretherketone and veneering composite resin: An in vitro study

Samir Georges Zogheib, Milton Edson Miranda, Rafael Pino Vitti, Samuel Santana Malheiros, William Cunha Brandt, Raphael Cavalcante Costa

The Journal of Indian Prosthodontic Society · 2026-07 · 26 (3) · 231-237

DOI: 10.4103/jips.jips_571_25 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift The Journal of Indian Prosthodontic Society, online erschienen am 01.07.2026. Verfasst von Samir Georges Zogheib und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculdade São Leopoldo Mandic (SLMANDIC), Instituto de Pesquisa São Leopoldo Mandic, R. José Rocha Junqueira 13, Campinas, Brazil. Hauptthemen laut MEDLINE: Polyethylene Glycols, Ketones, Composite Resins, Shear Strength. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

To examine the effects of different chemical surface treatments on the shear bond strength (SBS) between milled PEEK and veneering composite resin. Settings and Design: This was an in vitro comparative study. Materials and Methods: Sixty PEEK discs were assigned to four groups ( n = 15): no surface treatment (PEEK), bonding using a methyl methacrylate (MMA)-based adhesive (Single Bond Universal) (PEEK + BD), 10% hydrofluoric acid etching followed by bonding (PEEK + HFA + BD), and 98% sulfuric acid etching followed by bonding (PEEK + H 2 SO 4 + BD). The specimens were all bonded by using a MMA-based adhesive (Single Bond Universal). A luting agent (RelyX U200) was used to bond the composite resin (Universal Filtek Z350 X T) to the pretreated PEEK surfaces. An Instron universal machine was used to calculate the SBS between the PEEK and the composite resin following ISO 10477. Failure modes (cohesive, adhesive, and mixed) and interface morphology were analyzed by stereomicroscopy. Data were analyzed using the one-way ANOVA and Tukey’s post hoc tests ( a = 0.05). Statistical Analysis Used: Data were analyzed using the one-way ANOVA and Tukey’s post hoc tests ( a = 0.05).

Results

The mean SBS values of the PEEK + H 2 SO 4 + BD group (2.09 ± 0.90 MPa) were significantly higher than those of all other groups ( P < 0.05). The 10% HFA etching did not significantly affect the SBS values compared to the control group ( P > 0.05). PEEK + H 2 SO 2 +BD group also had the largest number of cohesive (55%) and mixed (45%) failures.

Conclusion

Etching with 98% sulfuric acid followed by a bonding agent significantly improved SBS between milled PEEK and veneer composite, although yet below the minimal threshold values.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polyethylene GlycolsKetonesComposite ResinsShear StrengthDental VeneersDental BondingBenzophenonesSurface PropertiesPolymersPolyether CompoundsIn Vitro TechniquesMaterials TestingAcid Etching, DentalDental Stress Analysis

Stichwörter der Autor:innen

Acid etchingpolyetheretherketonepolyetheretherketone bondingshear bond strengthsurface treatment

Substanzen

Polyethylene GlycolsKetonesBenzophenonesComposite ResinspolyetheretherketonePolymersPolyether Compounds

Autor:innen und Institutionen

  • Faculdade São Leopoldo Mandic (SLMANDIC), Instituto de Pesquisa São Leopoldo Mandic, R. José Rocha Junqueira 13, Campinas, Brazil.
  • Department of Implantology, School of Dentistry, University of Santo Amaro (UNISA), Santo Amaro, Brazil.
  • Department of Prosthodontics and Periodontology, Piracicaba Dental School, Universidade Estadual de Campinas (UNICAMP), Piracicaba, SP, Brazil.
  • School of Dentistry, Alfenas Federal University (UNIFAL-MG), Alfenas, Brazil.

Zitieren

APA

Zogheib, S. G., Miranda, M. E., Vitti, R. P., Malheiros, S. S., Brandt, W. C., & Costa, R. C. (2026). Effects of chemical surface treatments on the shear bond strength between polyetheretherketone and veneering composite resin: An in vitro study. The Journal of Indian Prosthodontic Society, 26(3), 231-237. https://doi.org/10.4103/jips.jips_571_25

Vancouver

Zogheib SG, Miranda ME, Vitti RP, Malheiros SS, Brandt WC, Costa RC. Effects of chemical surface treatments on the shear bond strength between polyetheretherketone and veneering composite resin: An in vitro study. The Journal of Indian Prosthodontic Society. 2026;26(3):231-237. doi:10.4103/jips.jips_571_25

BibTeX
@article{Zogheib2026,
  author = {Zogheib, Samir Georges and Miranda, Milton Edson and Vitti, Rafael Pino and Malheiros, Samuel Santana and Brandt, William Cunha and Costa, Raphael Cavalcante},
  title = {Effects of chemical surface treatments on the shear bond strength between polyetheretherketone and veneering composite resin: An in vitro study},
  journal = {The Journal of Indian Prosthodontic Society},
  year = {2026},
  volume = {26},
  number = {3},
  pages = {231--237},
  doi = {10.4103/jips.jips_571_25}
}
Kostenlos starten →