Comparative analysis of stress distribution in teeth restored with glass fiber post, short fiber-reinforced composite post, and ribbond fiber post: A three-dimensional finite element study
Journal of Conservative Dentistry and Endodontics · 2026-06 · 29 (6) · 608-614
DOI: 10.4103/jcde.jcde_102_26 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Conservative Dentistry and Endodontics, online erschienen am 13.05.2026. Verfasst von Guduri Susita und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Conservative Dentistry and Endodontics, Malla Reddy Dental College for Women, Malla Reddy Vishwavidyapeeth (Deemed to be University), H…. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Context
Endodontically treated teeth are biomechanically compromised and require posts to restore strength. Postmaterial elasticity influences stress distribution and long-term prognosis.
Aims
To compare stress distribution in teeth restored with glass fiber post, short fiber-reinforced composite (SFRC) post, and ribbond fiber post: A three-dimensional (3D) finite element analysis. Materials and Methods: 3D finite element models of maxillary central incisors were developed using ANSYS software based on Wheeler’s Dental Anatomy, incorporating enamel, dentin, cementum, periodontal ligament, gutta-percha, composite resin, and ceramic crown. Three models-glass fiber post, SFRC post, and ribbond fiber post – were analyzed with 4-mm gutta-percha seal. Material properties were assigned from the literature and a 100 N oblique load at 45° was applied. Stress distribution was evaluated using von Mises criteria.
Results
All postsystems showed similar deformation (≈0.1428 mm). Internal stresses within post were 12.28 MPa (Glass Fiber), 5.22 MPa (SFRC), and 9.73 MPa (Ribbond). Cervical stresses were 5.21, 5.15, and 5.20 MPa, and stresses at the post end were 3.61, 1.49, and 1.95 MPa. Maximum stress occurred cervically, with SFRC post showing lowest stresses.
Conclusions
Within the study limitations, SFRC posts exhibited favorable stress distribution, better dentin compatibility, reduced fracture risk, and enhanced restoration longevity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Conservative Dentistry and Endodontics, Malla Reddy Dental College for Women, Malla Reddy Vishwavidyapeeth (Deemed to be University), Hyderabad, Telangana, India.
Zitieren
APA
Susita, G., Swetha, K., Aravelli, S., Ramachandruni, N., Ghuguloth, L., & Amulya, M. R. (2026). Comparative analysis of stress distribution in teeth restored with glass fiber post, short fiber-reinforced composite post, and ribbond fiber post: A three-dimensional finite element study. Journal of Conservative Dentistry and Endodontics, 29(6), 608-614. https://doi.org/10.4103/jcde.jcde_102_26
Vancouver
Susita G, Swetha K, Aravelli S, Ramachandruni N, Ghuguloth L, Amulya MR. Comparative analysis of stress distribution in teeth restored with glass fiber post, short fiber-reinforced composite post, and ribbond fiber post: A three-dimensional finite element study. Journal of Conservative Dentistry and Endodontics. 2026;29(6):608-614. doi:10.4103/jcde.jcde_102_26
BibTeX
@article{Susita2026,
author = {Susita, Guduri and Swetha, Kasam and Aravelli, Swathi and Ramachandruni, Nimeshika and Ghuguloth, Laxmi and Amulya, Masuna Rukmini},
title = {Comparative analysis of stress distribution in teeth restored with glass fiber post, short fiber-reinforced composite post, and ribbond fiber post: A three-dimensional finite element study},
journal = {Journal of Conservative Dentistry and Endodontics},
year = {2026},
volume = {29},
number = {6},
pages = {608--614},
doi = {10.4103/jcde.jcde_102_26}
}
EUVIMED