EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Evaluation of heat-cure polymethyl methacrylate reinforced with microcrystalline cellulose in two different weight ratios for compressive strength – An in vitro study

Chitteti Devendra, V. Vamsi Krishna Reddy, Dileep Nag Vinnakota, Tejasree Alli, Neha Panabaka, Tannamala Pavan Kumar

International Journal of Preventive and Clinical Dental Research · 2026

DOI: 10.4103/ijpcdr.ijpcdr_10_26 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Preventive and Clinical Dental Research, 2026. Verfasst von Chitteti Devendra und 5 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Polymethyl methacrylate (PMMA) is widely used in prosthodontics due to its favorable physical and aesthetic properties. However, its limited mechanical strength remains a concern. This study aimed to evaluate the effect of reinforcing heat-cured PMMA with microcrystalline cellulose (MCC) in two different weight ratios, 5 wt% and 10 wt%, on compressive strength. Materials and Methods: Seventy-five samples were fabricated and divided into three groups ( n = 25 each): Group 1 (control – unmodified PMMA), Group 2 (PMMA + 5 wt% MCC), and Group 3 (PMMA + 10 wt% MCC). Compressive strength was measured using a universal testing machine. Data were statistically analyzed using one-way analysis of variance (ANOVA), followed by Tukey’s post hoc test, with significance set at P < 0.05.

Results

The mean compressive strength values were highest for the control group (11.908 MPa), followed by the 5 wt% MCC group (10.981 MPa), and lowest for the 10 wt% MCC group (10.243 MPa). One-way ANOVA revealed a statistically significant difference among the groups ( P = 0.000). Post hoc Tukey’s analysis confirmed significant differences between all pairwise comparisons (P < 0.05).

Conclusion

The incorporation of MCC into PMMA significantly reduced its compressive strength in a dose-dependent manner. While MCC offers a natural and potentially sustainable reinforcement option, its concentration must be carefully optimized to maintain the mechanical integrity of denture base materials.

Zitieren

APA

Devendra, C., Reddy, V. V. K., Vinnakota, D. N., Alli, T., Panabaka, N., & Kumar, T. P. (2026). Evaluation of heat-cure polymethyl methacrylate reinforced with microcrystalline cellulose in two different weight ratios for compressive strength – An in vitro study. International Journal of Preventive and Clinical Dental Research. https://doi.org/10.4103/ijpcdr.ijpcdr_10_26

Vancouver

Devendra C, Reddy VVK, Vinnakota DN, Alli T, Panabaka N, Kumar TP. Evaluation of heat-cure polymethyl methacrylate reinforced with microcrystalline cellulose in two different weight ratios for compressive strength – An in vitro study. International Journal of Preventive and Clinical Dental Research. 2026. doi:10.4103/ijpcdr.ijpcdr_10_26

BibTeX
@article{Devendra2026,
  author = {Devendra, Chitteti and Reddy, V. Vamsi Krishna and Vinnakota, Dileep Nag and Alli, Tejasree and Panabaka, Neha and Kumar, Tannamala Pavan},
  title = {Evaluation of heat-cure polymethyl methacrylate reinforced with microcrystalline cellulose in two different weight ratios for compressive strength – An in vitro study},
  journal = {International Journal of Preventive and Clinical Dental Research},
  year = {2026},
  doi = {10.4103/ijpcdr.ijpcdr_10_26}
}
Kostenlos starten →