EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY-NC-SA 4.0

Comparative Evaluation of Water Soluble Photoinitiators on the Mechanical and Physical Properties of Experimental Composite: An In Vitro Study

P Lakshmi Tulasi, Dhanasekaran Sihivahanan, K Vijay Venkatesh

Indian Journal of Dental Research · 2024

DOI: 10.4103/ijdr.ijdr_500_24 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Indian Journal of Dental Research, 2024. Verfasst von P Lakshmi Tulasi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Conservative Dentistry and Endodontics, SRM Kattankulathur Dental College and Hospital, SRM Institute of Science and Technology, Chenga…. Hauptthemen laut MEDLINE: Composite Resins, Photoinitiators, Dental. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Composite resin restoration is technique sensitive, where there is poor control over moisture leading to incomplete polymerization of the monomers. Hence, it is imperative to study a material which improves the mechanical and physical properties of the resin composite in the moist, oral environment, which is less affected by the saliva.

Aim

The aim of this study was to synthesize composite resin by combining water soluble photoinitiator such as 2,4,6-trimethylbenzoyl phosphine oxide (TPO) (type II) and camphorquinone (CQ) photoinitiator (type I) and to investigate mechanical and physical properties with and without salivary contamination when compared to traditional composite with CQ alone. Methodology: Experimental composite resin was synthesized by combining water soluble photoinitiator such as 2,4,6-trimethylbenzoyl phosphine oxide (TPO) with CQ photoinitiator. Samples were prepared based on ISO 4049 guidelines and divided into experimental composite with salivary contamination (n = 50), and without salivary contamination (n = 50) and traditional composite (SOLARE X-GC company) with salivary contamination (n = 50) and without salivary contamination (n = 50). Properties such as compressive strength, tensile strength, shear bond strength, degree of conversion, and depth of cure were evaluated.

Results

Experimental composite with salivary contamination had shown statistically significant difference in mechanical and physical properties when compared to traditional composite.

Conclusion

This study concluded that combining water soluble photoinitiator such as TPO (type II) with CQ (type I) provides a synergistic effect by increasing the mechanical properties under salivary conditions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Composite ResinsPhotoinitiators, DentalWaterMaterials TestingPhosphinesSolubilityIn Vitro TechniquesCamphorTensile StrengthPolymerizationHumansSaliva

Substanzen

Composite ResinsWaterPhosphinesPhotoinitiators, DentalcamphorquinoneCamphor(2,4,6-trimethylbenzoyl) diphenylphosphine oxide

Autor:innen und Institutionen

  • Department of Conservative Dentistry and Endodontics, SRM Kattankulathur Dental College and Hospital, SRM Institute of Science and Technology, Chengalpattu, Tamil Nadu, India.

Zitieren

APA

Tulasi, P. L., Sihivahanan, D., & Venkatesh, K. V. (2024). Comparative Evaluation of Water Soluble Photoinitiators on the Mechanical and Physical Properties of Experimental Composite: An In Vitro Study. Indian Journal of Dental Research. https://doi.org/10.4103/ijdr.ijdr_500_24

Vancouver

Tulasi PL, Sihivahanan D, Venkatesh KV. Comparative Evaluation of Water Soluble Photoinitiators on the Mechanical and Physical Properties of Experimental Composite: An In Vitro Study. Indian Journal of Dental Research. 2024. doi:10.4103/ijdr.ijdr_500_24

BibTeX
@article{Tulasi2024,
  author = {Tulasi, P Lakshmi and Sihivahanan, Dhanasekaran and Venkatesh, K Vijay},
  title = {Comparative Evaluation of Water Soluble Photoinitiators on the Mechanical and Physical Properties of Experimental Composite: An In Vitro Study},
  journal = {Indian Journal of Dental Research},
  year = {2024},
  doi = {10.4103/ijdr.ijdr_500_24}
}
Kostenlos starten →