Comparison of marginal and internal adaptation of provisional polymethyl methacrylate restorations fabricated by two three-dimensional printers: An in vitro study
Dental Research Journal · 2023-08 · 20 (1)
DOI: 10.4103/1735-3327.384358 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dental Research Journal, 2023-08. Verfasst von Mahya Hasanzade und 3 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 55 Literaturangaben.
Abstract (Originalsprache)
Background
Chairside fabrication of provisional restorations using three-dimensional (3D) printers is rising in digital dentistry. The purpose of this research was to compare the marginal and internal adaptation of provisional polymethyl methacrylate (PMMA) restorations fabricated by two different 3D printers. Materials and Methods: In this in vitro investigation, an intact maxillary 1st molar acrylic model was first digitalized by a laboratory scanner. It was then prepared for an all-ceramic restoration and scanned again by the same scanner. The final restoration was designed in Exocad according to the scan files with a 50 μm cement gap. PMMA restorations were printed by two 3D printers; Group 1: Asiga ( n = 10) and Group 2: Digident ( n = 10). The replica technique was used to assess the marginal and internal fit of the restorations, and one-way ANOVA was used to analyze the data. P 0.05). The mean occluso-axial gap (90 vs. 140 μ, P = 0.026) and the mean occlusal gap (116 vs. 300 μ, P = 0.001) of crowns in Group 1 were significantly smaller compared to the equivalent values in Group 2.
Conclusion
Provisional PMMA crowns fabricated by the Asiga printer showed significantly higher marginal and internal adaptation than those manufactured by Digident at all points except for the axial surface.
Zitieren
APA
Hasanzade, M., Zabandan, D., Mosaddad, S. A., & Habibzadeh, S. (2023). Comparison of marginal and internal adaptation of provisional polymethyl methacrylate restorations fabricated by two three-dimensional printers: An in vitro study. Dental Research Journal, 20(1). https://doi.org/10.4103/1735-3327.384358
Vancouver
Hasanzade M, Zabandan D, Mosaddad SA, Habibzadeh S. Comparison of marginal and internal adaptation of provisional polymethyl methacrylate restorations fabricated by two three-dimensional printers: An in vitro study. Dental Research Journal. 2023;20(1). doi:10.4103/1735-3327.384358
BibTeX
@article{Hasanzade2023,
author = {Hasanzade, Mahya and Zabandan, Dariush and Mosaddad, Seyed Ali and Habibzadeh, Sareh},
title = {Comparison of marginal and internal adaptation of provisional polymethyl methacrylate restorations fabricated by two three-dimensional printers: An in vitro study},
journal = {Dental Research Journal},
year = {2023},
volume = {20},
number = {1},
doi = {10.4103/1735-3327.384358}
}
EUVIMED