Co-firing performance of pellets prepared from rice husk, rice straw, and lignite in a circulating fluidized bed combustor
Journal of Agricultural Engineering · 17.11.2026
DOI: 10.4081/jae.2026.2103 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Agricultural Engineering, online erschienen am 17.11.2026. Verfasst von Volkan Coban und 5 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This study evaluates the co-firing performance of rice husk (RH) and rice straw (ST) pellets with and without 25% lignite addition in a 350 kWₜₕ circulating fluidized bed boiler. Four pellet formulations (RH100, RH75+CP25, ST100, and ST75+CP25) were investigated in terms of mechanical properties, thermal reactivity, and gaseous emissions. RH100 exhibited a higher vertical compressive strength than ST100 (21.55 vs 13.00 MPa), whereas ST100 showed higher abrasive resistance (98.02 vs 94.55%). The addition of 25% lignite caused modest reductions in compressive strength and abrasive resistance, while impact resistance remained high for all formulations (99.79-99.98%). Thermogravimetric analysis showed higher combustion reactivity for the pure biomass pellets than for the corresponding lignite-containing blends. Ignition temperatures increased from 221 to 245°C for the RH-based formulations and from 216 to 220°C for the ST-based formulations after lignite addition. ST100 exhibited the highest combustion indices, with Di = 0.044, S = 1.57 × 10⁻¹⁵, and C = 3.68 × 10⁻¹⁰. During CFBB combustion at 850±10°C, lignite addition increased CO concentrations from 1083.55 to 1803.96 mg/Nm³ for the RH-based fuels and from 1488.17 to 2832.42 mg/Nm³ for the ST-based fuels. SO₂ was not detected for the pure biomass pellets but reached 29.21 and 64.30 mg/Nm³ for RH75+CP25 and ST75+CP25, respectively, while NO emissions remained within 8.01–13.77 mg/Nm³. Overall, the results demonstrate a clear trade-off associated with 25% lignite incorporation: pellet mechanical integrity was largely retained, whereas combustion reactivity decreased and CO and SO₂ emissions increased. Among the tested formulations, the pure biomass pellets provided the most favorable overall balance of mechanical integrity, combustion reactivity, and gaseous emissions.
Zitieren
APA
Coban, V., Ekinci, K., Solak, M., Yurdakul, S., Gürel, B., & Kurtuluş, K. (2026). Co-firing performance of pellets prepared from rice husk, rice straw, and lignite in a circulating fluidized bed combustor. Journal of Agricultural Engineering. https://doi.org/10.4081/jae.2026.2103
Vancouver
Coban V, Ekinci K, Solak M, Yurdakul S, Gürel B, Kurtuluş K. Co-firing performance of pellets prepared from rice husk, rice straw, and lignite in a circulating fluidized bed combustor. Journal of Agricultural Engineering. 2026. doi:10.4081/jae.2026.2103
BibTeX
@article{Coban2026,
author = {Coban, Volkan and Ekinci, Kamil and Solak, Mehmet and Yurdakul, Sema and Gürel, Barış and Kurtuluş, Karani},
title = {Co-firing performance of pellets prepared from rice husk, rice straw, and lignite in a circulating fluidized bed combustor},
journal = {Journal of Agricultural Engineering},
year = {2026},
doi = {10.4081/jae.2026.2103}
}
EUVIMED