EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

The design of a force feedback soft gripper for tomato harvesting

Asiwan Kultongkham, Supakit Kumnon, Tawan Thintawornkul, Teeranoot Chanthasopeephan

Journal of Agricultural Engineering · 18.03.2021 · 52 (1)

DOI: 10.4081/jae.2021.1090 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Agricultural Engineering, online erschienen am 18.03.2021. Verfasst von Asiwan Kultongkham und 3 weiteren Autor:innen. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In smart farming, both artificial intelligence and robotic systems are applied in order to improve efficiency. In agriculture, for jobs such as seeding, monitoring, and harvesting, robots are widely used. When using robots to harvest fruit and vegetables, it is essential not to apply excessive force, as it may damage the harvest. In this paper, a soft robotic three-fingered gripper is presented. It was designed and analysed using the finite element method. Each finger is made of silicone rubber. The shape of the finger is designed so that it is capable of handling spherical shaped objects, such as tomatoes or oranges. When holding a tomato, the fingers apply the contact force. The fingers are actuated pneumatically and the force applied is also controlled by a micro controller. The pressure inside the air chamber of the finger is in the range of 0- 95 kPa. Force sensors are attached to the end of each finger to provide force feedback. Then, the holding force is adjusted and applied to the surface of the tomato. The gripper can successfully grasp tomatoes with a force less than the bio-yield of the tomatoes 2.57 N.

Zitieren

APA

Kultongkham, A., Kumnon, S., Thintawornkul, T., & Chanthasopeephan, T. (2021). The design of a force feedback soft gripper for tomato harvesting. Journal of Agricultural Engineering, 52(1). https://doi.org/10.4081/jae.2021.1090

Vancouver

Kultongkham A, Kumnon S, Thintawornkul T, Chanthasopeephan T. The design of a force feedback soft gripper for tomato harvesting. Journal of Agricultural Engineering. 2021;52(1). doi:10.4081/jae.2021.1090

BibTeX
@article{Kultongkham2021,
  author = {Kultongkham, Asiwan and Kumnon, Supakit and Thintawornkul, Tawan and Chanthasopeephan, Teeranoot},
  title = {The design of a force feedback soft gripper for tomato harvesting},
  journal = {Journal of Agricultural Engineering},
  year = {2021},
  volume = {52},
  number = {1},
  doi = {10.4081/jae.2021.1090}
}
Kostenlos starten →