EUVIMEDEUVIMED entdecken
Crossref

Additive Magnet Free Circulator for Heterogenous Integration

Andrew Luce, Lucas Unger, Jason Adams, John Lovassen, Mary Herndon, Alkim Akyurtlu

IMAPSource Proceedings · 04.11.2026 · 2026 (Symposium)

DOI: 10.4071/001c.173597 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 04.11.2026. Verfasst von Andrew Luce und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As RF systems continue to shrink in size and weight, traditional ferrite circulator architectures present an integration challenge due to their reliance on bulky permanent magnets, resulting in components that are heavy and difficult to integrate into compact RF systems. Permanent-magnet-free circulators based on low-loss ferrites, in which magnetic biasing is achieved using externally applied fields, have been proposed in prior work. However, the self-biased puck is traditionally placed in a milled pocket within the substrate or surface mounted. A surface-mounted implementation requires a ramped transition structure to elevate the microstrip from the planar board surface to the top of the puck. Both approaches can be complex and costly using conventional fabrication processes. Additive manufacturing (AM) techniques enable the creation of non-standard three-dimensional geometries that can satisfy the requirements of these ramped transitions while simplifying fabrication. This work presents an additively integrated circulator fabricated using digital light processing (DLP) and aerosol jet printing (AJP). DLP was employed to fabricate the transition structure between the printed wiring board (PWB) test fixture and ferrite puck, while AJP was used to deposit the conductive RF features and dielectric seam structures that enable impedance matched electrical interconnections to the top surface of the ferrite. The ferrite puck is mounted to a ground pad on the PWB using conductive epoxy, and conductive AJP traces are aligned with the fabricated microstrip transmission lines on the test fixture. Measured performance was compared with electromagnetic simulations, demonstrating the feasibility of using additive manufacturing to simplify the fabrication and integration of complex three-dimensional RF structures.

Zitieren

APA

Luce, A., Unger, L., Adams, J., Lovassen, J., Herndon, M., & Akyurtlu, A. (2026). Additive Magnet Free Circulator for Heterogenous Integration. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173597

Vancouver

Luce A, Unger L, Adams J, Lovassen J, Herndon M, Akyurtlu A. Additive Magnet Free Circulator for Heterogenous Integration. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173597

BibTeX
@article{Luce2026,
  author = {Luce, Andrew and Unger, Lucas and Adams, Jason and Lovassen, John and Herndon, Mary and Akyurtlu, Alkim},
  title = {Additive Magnet Free Circulator for Heterogenous Integration},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2026},
  number = {Symposium},
  doi = {10.4071/001c.173597}
}
Kostenlos starten →