Reliability of Copper Electrodes on Glass Substrates Fabricated by the TORIZING Process for TGV Applications
IMAPSource Proceedings · 27.10.2026 · 2026 (Symposium)
DOI: 10.4071/001c.173324 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.10.2026. Verfasst von Ming-chun Hsieh und 10 weiteren Autor:innen.
Abstract (Originalsprache)
Glass substrates incorporating through-glass vias (TGVs) have attracted considerable attention as a promising platform for next-generation semiconductor packaging because of their favorable electrical, thermal, and dimensional properties. For TGV applications, reliable adhesion and electrical stability of Cu metallization on glass are essential. In this study, an electroless Cu/metal oxide structure was fabricated on quartz glass using the TORIZING Process (Okuno Chemical Industries Co., Ltd.). Its reliability was evaluated by thermal cycling between −55 and 150 °C for up to 300 cycles and by high-temperature storage at 150 °C for up to 300 h. Electrical resistance was measured using a four-terminal method in the as-fabricated condition and after every 100 cycles or 100 h. Cross-sectional observations were also performed after the reliability tests using field-emission scanning electron microscopy. The measured resistance increased approximately linearly with conductor length, and no significant change in the resistance–length relationship was observed after either thermal cycling or high-temperature storage. Furthermore, no obvious cracking or delamination was detected in the electroless Cu/metal oxide/glass structure after either test. These results indicate that Cu metallization fabricated using the TORIZING Process maintained electrical continuity and interfacial integrity under the present test conditions, supporting its potential for future TGV and glass-core packaging applications.
Zitieren
APA
Hsieh, M., Nishijima, M., Suetake, A., Nakagiri, T., Lee, S., Yamanaka, K., Okumura, R., Kitahara, Y., Yoshikawa, J., Nishikawa, H., & Suganuma, K. (2026). Reliability of Copper Electrodes on Glass Substrates Fabricated by the TORIZING Process for TGV Applications. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173324
Vancouver
Hsieh M, Nishijima M, Suetake A, Nakagiri T, Lee S, Yamanaka K, et al. Reliability of Copper Electrodes on Glass Substrates Fabricated by the TORIZING Process for TGV Applications. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173324
BibTeX
@article{Hsieh2026,
author = {Hsieh, Ming-chun and Nishijima, Masahiko and Suetake, Aiji and Nakagiri, Takuya and Lee, Sangmin and Yamanaka, Kimihiro and Okumura, Rieko and Kitahara, Yuhei and Yoshikawa, Junichi and Nishikawa, Hiroshi and Suganuma, Katsuaki},
title = {Reliability of Copper Electrodes on Glass Substrates Fabricated by the TORIZING Process for TGV Applications},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2026},
number = {Symposium},
doi = {10.4071/001c.173324}
}
EUVIMED