Towards a Digital Twin for Failure Risk Prediction of Epoxy Mold Compounds and Warpage Modeling in Advanced Packaging
IMAPSource Proceedings · 27.10.2026 · 2026 (Symposium)
DOI: 10.4071/001c.173312 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.10.2026. Verfasst von Sasi Kumar Tippabhotla und 2 weiteren Autor:innen.
Abstract (Originalsprache)
In this work we present a predictive simulation model for epoxy mold compound (EMC), based-on advanced material characterization and inelastic material modelling. Tensile testing at different temperatures and loading rates was conducted to characterize the plasticity, creep and stress relaxation behaviors of the EMC material. Experimentally observed plasticity and creep behaviors are incorporated in the inelastic (viscoplastic) material model. A linear viscoelastic (LVE) material model was fit using the stress-relaxation test data and compared with the widely adopted LVE material model fitted from a frequency-sweep based DMA testing. These models were incorporated into the packaging simulations to account for the realistic behavior of EMC under thermal cycling and wafer warpage. Accumulated permanent strains in EMC were probed for fatigue life predictions. The relaxation testing based LVE model was shown to give more accurate wafer warpage prediction, than the frequency-sweep based LVE models. Furthermore, the merits of the proposed modeling and methodology compared to conventional modeling were discussed. This approach is readily implementable in package simulations using commercial FEA software and expected to add failure predictive capabilities.
Zitieren
APA
Tippabhotla, S. K., Lin, J., & Chai, T. (2026). Towards a Digital Twin for Failure Risk Prediction of Epoxy Mold Compounds and Warpage Modeling in Advanced Packaging. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173312
Vancouver
Tippabhotla SK, Lin J, Chai T. Towards a Digital Twin for Failure Risk Prediction of Epoxy Mold Compounds and Warpage Modeling in Advanced Packaging. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173312
BibTeX
@article{Tippabhotla2026,
author = {Tippabhotla, Sasi Kumar and Lin, Ji and Chai, Tai-Chong},
title = {Towards a Digital Twin for Failure Risk Prediction of Epoxy Mold Compounds and Warpage Modeling in Advanced Packaging},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2026},
number = {Symposium},
doi = {10.4071/001c.173312}
}
EUVIMED