Enabling High-Density Power Packaging: Bridge and Fill for Through-Hole Filling in Advanced IC Substrate Core
IMAPSource Proceedings · 27.10.2026 · 2026 (Symposium)
DOI: 10.4071/001c.173308 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.10.2026. Verfasst von Inosh Perera und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Through-hole (TH) filling technology has emerged as a pivotal component in high-performance integrated circuit (IC) packaging, effectively addressing the electrical and thermal challenges posed by advanced applications such as artificial intelligence (AI), high-performance computing (HPC), and data center servers. AI accelerators and HPC modules are driving unprecedented increases in power density, with leading-edge AI devices exceeding 1 kW per package, and server processors routinely dissipating between 400 W and 600 W. These elevated power levels, coupled with increased body sizes reaching 120 x140 mm, emphasize the need for robust vertical interconnects that minimize voltage drop and maintain power integrity under high-current operation in confined spaces. TH fills provide a low-resistance vertical path between the die and substrate, significantly reducing IR drop (voltage drop) – an essential factor as data indicates that even a 10% reduction in voltage drop can yield measurable improvements in computational reliability and energy efficiency. In addition to electrical performance, thermal management remains a critical concern. Next-generation servers are approaching heat fluxes of 150 W/cm², placing immense stress on conventional cooling architectures. TH fills function as efficient thermal conduits, facilitating rapid heat transfer from the die through the substrate and ultimately to the printed circuit board, thereby mitigating hotspots and lowering overall thermal resistance. This capability is vital in AI and HPC deployments, where thermal excursions can limit performance or compromise device lifetime. Furthermore, the compatibility of TH fill with flip-chip assembly and organic substrates supports both the cost and scalability requirements outlined in advanced packaging roadmaps. As packaging technologies evolve toward higher power densities and increased integration, the strategic incorporation of TH filling stands out as an indispensable approach for achieving efficient power delivery and effective heat removal in state-of-the-art electronics. The technical methodology for TH filling involves two sequential stages of acid-copper plating. Initially, a periodic pulse-reverse (PPR) electroplating process establishes a copper bridge near the midpoint of the TH, followed by direct-current (DC) electroplating to complete the fill. This process addresses common challenges such as uneven current distribution. Which, if unmitigated, can result in voids and incomplete fills which are detrimental to HPC and AI reliability. Additive control, electrolyte management, and process optimization, are critical as these factors directly correlate with minimizing surface roughness, dendritic growth, and internal stresses that could otherwise lead to cracking or delamination during thermal cycling in high-power environments. To systematically identify and optimize critical additive parameters affecting void rates and surface copper uniformity, a design of experiment (DOE) will be implemented as part of this study. This investigation evaluates the effectiveness of TH filling through a bridge and fill process applied to panels with challenging thicknesses, representing configurations of advanced server and AI module substrates. The optimized process consistently delivered defect-free THs, with total plated copper thicknesses below 100 μm and surface dimples under 20 μm—metrics aligned with benchmarks for high-reliability interconnects in data center applications. The use of tanks with eductor agitation not only enhances process throughput but also reduces operational complexity and cost, supporting the scale-up requirements for AI and HPC manufacturing. Additionally, the adaptability of this technique to hybrid THs with varying aspect ratios (AR) is examined, demonstrating robust performance and reliability across diverse geometries as demanded by modern server and AI system architectures. In summary, TH fill technology, supported by quantitative literature data, is confirmed as a cornerstone for the power and thermal management challenges inherent to the next generation of high-performance electronic systems.
Zitieren
APA
Perera, I., Brossman, S., Aranzales, D., & Dharmarathna, S. (2026). Enabling High-Density Power Packaging: Bridge and Fill for Through-Hole Filling in Advanced IC Substrate Core. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173308
Vancouver
Perera I, Brossman S, Aranzales D, Dharmarathna S. Enabling High-Density Power Packaging: Bridge and Fill for Through-Hole Filling in Advanced IC Substrate Core. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173308
BibTeX
@article{Perera2026,
author = {Perera, Inosh and Brossman, Scott and Aranzales, Diana and Dharmarathna, Saminda},
title = {Enabling High-Density Power Packaging: Bridge and Fill for Through-Hole Filling in Advanced IC Substrate Core},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2026},
number = {Symposium},
doi = {10.4071/001c.173308}
}
EUVIMED