Enabling Low-Temperature Cu-to-Cu Direct Bonding via Nanocrystalline Cu and Cu-Selective Oxide Suppression Coating
IMAPSource Proceedings · 26.10.2026 · 2026 (Symposium)
DOI: 10.4071/001c.173036 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 26.10.2026. Verfasst von Oliver M.R. Chyan und 4 weiteren Autor:innen.
Abstract (Originalsprache)
The rapid advancement of artificial intelligence (AI), high-performance computing (HPC), and data-centric technologies is driving demand for interconnects with ultra-high density, low resistance, and superior reliability. While Cu-to-Cu direct bonding offers significant advantages over conventional Cu-to-solder interconnects, including ultra-fine pitch capability, lower electrical resistance, and improved thermal performance, its widespread adoption remains limited by the rapid oxidation of Cu surfaces under ambient conditions. Native Cu oxides act as diffusion barriers, requiring elevated bonding temperatures and pressures that increase wafer warpage, thermal stress, and process complexity. Nanocrystalline Cu (NC-Cu) has emerged as a promising approach for low-temperature Cu-to-Cu bonding due to its high grain boundary density, which enhances atomic diffusivity and promotes interfacial bonding at reduced temperatures. However, the increased surface area and high-energy grain boundaries of NC-Cu also accelerate oxidation, diminishing its bonding advantages. To address this challenge, we present a dual-strategy approach that combines controlled NC-Cu growth with an ultra-thin Cu-selective passivation coating. NC-Cu with a grain size of 80 nm and a surface roughness of 4.7 nm was engineered to facilitate rapid low-temperature bonding. A conformal 5 nm Cu-selective passivation coating was subsequently applied to suppress oxidation while preserving Cu atomic diffusion. The Cu-selective passivation coating was deposited using a liquid-phase deposition (LPD) process. The coating thickness and composition were optimized and monitored using attenuated total reflectance infrared (ATR-IR) spectroscopy. The passivation layer reduced oxide formation by ~ 85% at 200 °C without introducing measurable interfacial resistance. Combined with enhanced grain boundary diffusion, this approach enables oxidation-resistant, low-temperature Cu-to-Cu bonding under ambient conditions, providing a scalable and cost-effective pathway for next-generation heterogeneous integration and advanced packaging technologies.
Zitieren
APA
Chyan, O. M., Durai, K. A. J., Tran, K. T. A., Perera, D. A. S., & Nair, S. S. (2026). Enabling Low-Temperature Cu-to-Cu Direct Bonding via Nanocrystalline Cu and Cu-Selective Oxide Suppression Coating. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173036
Vancouver
Chyan OM, Durai KAJ, Tran KTA, Perera DAS, Nair SS. Enabling Low-Temperature Cu-to-Cu Direct Bonding via Nanocrystalline Cu and Cu-Selective Oxide Suppression Coating. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173036
BibTeX
@article{Chyan2026,
author = {Chyan, Oliver M.R. and Durai, Kevin Antony Jesu and Tran, Khanh Tuyet Anh and Perera, Duwage Anushka Sandaruwan and Nair, Shinoj Sridharan},
title = {Enabling Low-Temperature Cu-to-Cu Direct Bonding via Nanocrystalline Cu and Cu-Selective Oxide Suppression Coating},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2026},
number = {Symposium},
doi = {10.4071/001c.173036}
}
EUVIMED