High Density Interconnect for a High Pin Count Optical IC
IMAPSource Proceedings · 27.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.165803 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.07.2026. Verfasst von Gerard Kums und 2 weiteren Autor:innen.
Abstract (Originalsprache)
An interconnect solution was developed to connect a large 21x45 mm2 optical IC with 2500 I/O’s to its driver electronic boards by means of a flexible printed circuit with multi-level bond pads. The bond pad pitch of the IC was 72 mm pitch (2 row staggered), but the limited available volume, the extreme requirements for mechanical and thermal stability of the IC as well as some boundary conditions to guarantee the signal integrity made it necessary to develop a complex 5 level interconnect structure in combination with fine pitch aluminium wire bonding. Out of several interconnect options a preferred architecture was chosen. To prove the feasibility of the selected solution, several prototypes were built. The multi-disciplinary approach focused on risk reduction of the assembly process. A lot of effort was put in the design of the IC carrier to achieve the thermal and mechanical stability. The wire bond geometry was carefully defined and also the flex layer build-up was optimized to achieve optimal rigidity.
Zitieren
APA
Kums, G., Bruinsma, N., & Bex, J. (2026). High Density Interconnect for a High Pin Count Optical IC. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165803
Vancouver
Kums G, Bruinsma N, Bex J. High Density Interconnect for a High Pin Count Optical IC. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165803
BibTeX
@article{Kums2026,
author = {Kums, Gerard and Bruinsma, Nienke and Bex, Jan},
title = {High Density Interconnect for a High Pin Count Optical IC},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.165803}
}
EUVIMED