Comparison of Catalyst Performance for a Direct Methanol Fuel Cell Fabricated in Low Temperature Cofired Ceramics (LTCC)
IMAPSource Proceedings · 27.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.165790 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.07.2026. Verfasst von Yong Gao und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Integrating a power source, such as a direct methanol fuel cell (DMFC) into a low temperature cofired ceramic (LTCC) based microsystem allows for the next level of microsystem integration. In our LTCC-based DMFC structure, a porous silver tape is used to replace the traditional carbon electrode. Catalysts play a critical role in fuel cell performance. Two catalyst-preparing methods were evaluated, one cofired and one post fired, using platinum and ruthenium resinates for the catalysis source. The cofired anode microstructure demonstrated many whiskers with higher degreed Pt-Ru alloy and Ag while the post fired anode exhibited Ag, lower degreed Pt/Ru alloying and RuO2. Cyclic voltammetry results show that the cofired catalyst has a better catalyst effect than that of post fired catalyst and both had a better catalysis performance that the catalyst on a standard carbon based anode. These specific catalyst microstructures contributed to the better catalysis effect in the methanol oxidation reaction (MOR) and the oxygen reduction reaction (ORR) respectively.
Zitieren
APA
Gao, Y., Kong, X., & Jones, K. (2026). Comparison of Catalyst Performance for a Direct Methanol Fuel Cell Fabricated in Low Temperature Cofired Ceramics (LTCC). IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165790
Vancouver
Gao Y, Kong X, Jones K. Comparison of Catalyst Performance for a Direct Methanol Fuel Cell Fabricated in Low Temperature Cofired Ceramics (LTCC). IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165790
BibTeX
@article{Gao2026,
author = {Gao, Yong and Kong, Xiangxing and Jones, Kinzy},
title = {Comparison of Catalyst Performance for a Direct Methanol Fuel Cell Fabricated in Low Temperature Cofired Ceramics (LTCC)},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.165790}
}
EUVIMED