Alternative Processing Methods for Copper Through Silicon Vias
IMAPSource Proceedings · 23.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.165480 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 23.07.2026. Verfasst von Gayathri Devi Jampana und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Over the past decade, there has been significant development of 3D packaging due to its reduced interconnect length and associated parasitics. Through Silicon Via technology (TSV) enables short and dense interconnects with increased speed and reduced noise. Via-first and Via-last are the two standard ways of fabricating TSVs based on the order of forming vias, either before or after fabricating active devices. In the project discussed here, TSVs are formed in a wafer that will function as a multichip substrate in a 3-D stack, and will not itself contain active devices. At the University of Arkansas, most of the research projects have been based on the Via-last approach of fabricating TSVs. The method reported here is a novel approach of bottom-up filling of through vias using copper DC plating. Blind vias of aspect ratio 6:1 are first etched with Bosch scallops in a high resistance process wafer. Then the method involves two carrier wafers. The first carrier is bonded to the process wafer with a double-sided thermal release tape, which provides mechanical support during thinning. The process wafer is thinned down to 200 μm by grinding and blanket etch in RIE, until the backside of the vias are exposed. The process wafer is then debonded. The second carrier has a Ti/Cu/Ti seed layer to initiate copper plating and is bonded to the process wafer so that the bonding agent can be removed at the base of the vias to expose metal on the carrier for plating. Copper is plated using DC current on titanium for shearing of plated vias from the carrier wafer. Scallops inside the vias provide mechanical support to the plated copper. Wafers have been debonded and examined for plating uniformity and the presence of voids. This paper reports on the development of this novel process.
Zitieren
APA
Jampana, G. D., Schaper, L. W., Abhulimen, I., & Liu, Y. (2026). Alternative Processing Methods for Copper Through Silicon Vias. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165480
Vancouver
Jampana GD, Schaper LW, Abhulimen I, Liu Y. Alternative Processing Methods for Copper Through Silicon Vias. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165480
BibTeX
@article{Jampana2026,
author = {Jampana, Gayathri Devi and Schaper, Leonard W. and Abhulimen, Isi and Liu, Yang},
title = {Alternative Processing Methods for Copper Through Silicon Vias},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.165480}
}
EUVIMED