Manual Soldering Options for High Reliability Applications
IMAPSource Proceedings · 23.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.165469 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 23.07.2026. Verfasst von John Vivari.
Abstract (Originalsprache)
Wire soldering operations are still widely accepted in the electronics assembly industry. When a product or the parts within it cannot withstand the heat of oven reflow or the quantity being assembled does not support a mass reflow solution, the localized heat provided by a soldering iron has been the traditional solution. In high-reliability applications, this leaves product vulnerable to both the inherent thermal shock-related damage that even the best soldering operators can cause, as well as the solder joint value judgments of individual operators over a wide range of skill levels. Whether in low-volume custom operations or large-scale manufacturing processes, the quality of hand-soldered joints will exhibit a high degree of variation. Defect, scrap, and rework rates can be excessive, even when using skilled employees. Higher temperature lead-free operations present an additional challenge. Because of the higher temperatures required, these processes have even smaller operating windows. Visual inspection of lead-free solder joints also presents new difficulties, and since most hand-soldering rework occurs ‘on-the-fly,’ actual defect rates are difficult to measure. Process solutions are available which involve very little capital expenditure, but can significantly increase operator output. These solutions are effective in eliminating many of the process defects associated with wire solder. They will usually result in a faster and more controllable process that reduces scrap and improves overall product quality. In many applications where wire solder was once a requirement, a more mechanized approach can often be achieved using solder paste and localized heating methods.
Zitieren
APA
Vivari, J. (2026). Manual Soldering Options for High Reliability Applications. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165469
Vancouver
Vivari J. Manual Soldering Options for High Reliability Applications. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165469
BibTeX
@article{Vivari2026,
author = {Vivari, John},
title = {Manual Soldering Options for High Reliability Applications},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.165469}
}
EUVIMED