RF MEMS Flip-chip Package Design: Finite Element Modeling and Experimental Verification
IMAPSource Proceedings · 21.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.165368 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 21.07.2026. Verfasst von Li Sun und 4 weiteren Autor:innen.
Abstract (Originalsprache)
RF MEMS device performance can be very sensitive to the die deformation, so appropriate methods need to be considered for the design of the device and package. A numerical approach has been developed to study the die deformation due to the thermal mismatch between die and package substrate as well as the multiple metal-oxide layers associated with the integration of HV RF-CMOS and RF MEMS device layers. The numerical approach consists of two steps: die-level modeling and package-level modeling where the die is flip-chip assembled on a ceramic substrate. The experimental verification is completed by comparison of die-level and package-level models to measurements using Twyman/Green (T/G) interferometry from -40 °C to 210 °C and -40 °C to 200 °C, respectively. The die warpage from modeling is in good agreement with that of T/G interferometry measurement. The warpage of a bare die is approximately 0.4 μm at room temperature and varies non- linearly as temperature changes. The non-linearity is attributed to the plastic deformation of metal in the multiple metal-oxide layers. The validated die-level model is then transferred to package-level model to study the behavior of the assembled die. The warpage of the assembled die is approximately 1.1 μm at room temperature and changes more linearly as a function of temperature. It is concluded that the die/package modeling approach with proper modeling considerations is the key to accurately describe the non-linear characteristics of complex RF MEMS dies and provide more reliable modeling results for package design.
Zitieren
APA
Sun, L., Cunningham, S., Morris, A., Jang, C., & Han, B. (2026). RF MEMS Flip-chip Package Design: Finite Element Modeling and Experimental Verification. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165368
Vancouver
Sun L, Cunningham S, Morris A, Jang C, Han B. RF MEMS Flip-chip Package Design: Finite Element Modeling and Experimental Verification. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165368
BibTeX
@article{Sun2026,
author = {Sun, Li and Cunningham, Shawn and Morris, Art and Jang, Changsoo and Han, Bongtae},
title = {RF MEMS Flip-chip Package Design: Finite Element Modeling and Experimental Verification},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.165368}
}
EUVIMED