A New 3D Shaped, Monolithic PZT Beam Actuator Produced by Ceramic Injection Molding
IMAPSource Proceedings · 14.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.165069 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 14.07.2026. Verfasst von Matthias Hartmann und 2 weiteren Autor:innen.
Abstract (Originalsprache)
A monolithic piezoelectric beam actuator has been produced by ceramic injection molding (CIM). Usually piezoelectric beam actuators are realized by gluing two thin piezo ceramics with different expansion coefficients. This technology is quite complex and cost intensive and the actuators are not shock-resistant. The goal of this study was to manufacture a real 3D beam actuator made of one solid element in only one forming process. Therefore a non constant cross section in thickness direction was used to transform the material strain into an actuator motion. Different actuator thickness ratios have been simulated to optimize the degree of efficiency. How ever the final monolithic actuator is robust against shock. This was accomplished by having a high geometrical moment of inertia excited to the thickness ratios. Big advantages of the ceramic injection molding process are more freedom of design, lead-zirconate-titanate (PZT) actuators and sensors with new functional structures and the possibility for low budget mass production. Real 3D PZT elements can be formed with a constant density only by this technology. To achieve these goals, many researches into material behaviour, especially shrinking caused by debinding and sintering of the ceramic feedstock, have been done. These technical expertises were used for the final design of the injection molding tool and forming process. Because of using a mixed compound piezoelectric ceramic powder with addition of a thermoplastic binder system as injection molding aid, the properties of the finally polarized PZT are equivalent to other processing technologies like dry pressing or thick film. The CIM principle is used to form special structures (e.g. beams, membranes) with a 3D shaped surface. Therefore the main focus is on deriving precision and optimisation for low cost mass production.
Zitieren
APA
Hartmann, M., Hirsch, S., & Schmidt, B. (2026). A New 3D Shaped, Monolithic PZT Beam Actuator Produced by Ceramic Injection Molding. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165069
Vancouver
Hartmann M, Hirsch S, Schmidt B. A New 3D Shaped, Monolithic PZT Beam Actuator Produced by Ceramic Injection Molding. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165069
BibTeX
@article{Hartmann2026,
author = {Hartmann, Matthias and Hirsch, Soeren and Schmidt, Bertram},
title = {A New 3D Shaped, Monolithic PZT Beam Actuator Produced by Ceramic Injection Molding},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.165069}
}
EUVIMED