EUVIMEDEUVIMED entdecken
Crossref

Laser Reflow: A Solution for Medical Electronics Assembly

John Vivari

IMAPSource Proceedings · 10.07.2026 · 2008 (Symposium)

DOI: 10.4071/001c.164942 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 10.07.2026. Verfasst von John Vivari.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the advent of RoHS legislation in Europe, numerous medical equipment manufacturers have found that the higher reflow temperatures required result in damage to their products using their existing heating methods. In the realm of medical micro-electronics, some parts are too small or too light to be soldered using contact heating. In the quest for miniaturization and ergonomics, access to solder connections can be restrictive by design. In all three cases, lasers offer opportunities in noncontact selective soldering that succeed where other methods fail. Laser soldering is not new. Manufacturers have been experimenting with use of lasers for reflow since the 1970s. Early CO2 and Nd:YAG systems were both bulky and expensive. They also were designed for high power cutting and marking operations as opposed to lower power heating. At the time, and until recently, solder materials were not compatible with the extremely high heating rates typical of laser heating. Flux components would vaporize too quickly and explode, spattering flux and alloy away from the heated area. EFD has developed rapid reflow solder pastes that incorporate fluxes designed to provide good wetting and resist spattering in the short laser heating cycle.

Zitieren

APA

Vivari, J. (2026). Laser Reflow: A Solution for Medical Electronics Assembly. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.164942

Vancouver

Vivari J. Laser Reflow: A Solution for Medical Electronics Assembly. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.164942

BibTeX
@article{Vivari2026,
  author = {Vivari, John},
  title = {Laser Reflow: A Solution for Medical Electronics Assembly},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2008},
  number = {Symposium},
  doi = {10.4071/001c.164942}
}
Kostenlos starten →