Thick Al Ribbon Interconnects: A Feasible Solution for Power Devices Packaging
IMAPSource Proceedings · 09.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.164860 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 09.07.2026. Verfasst von Wei Sun Loh und 5 weiteren Autor:innen.
Abstract (Originalsprache)
With the constant drive for smaller, more cost effective power electronic systems offering enhanced performance and reliability, Aluminium (Al) ribbon bonding has become an attractive alternative to the well established thick Al wire bonding. Improved electrical performance and assembly cost reduction are the main expected benefits. Although ribbon bonding is viewed as a drop-in replacement for wire bonding, differences in the details of the joining process are to be expected. The potential effects of those differences on the bond formation and ultimately the bond reliability warrant a more detailed investigation. This work covers a first step, in which we analyze and report the effects of different target bond deformation levels on the strength and reliability of 80 × 8 mil thick Al ribbon bonded with different bond tools. The long-term strength and reliability of these ribbon bonds were assessed under thermal cycling between –60°C to 170°C. Bond shear testing was used to characterize bond strength. Microstructural analysis was performed and the correlation between measured bond shear strength and crack length along the bond interface at increasing numbers of thermal cycles was studied. In summary, both the bond tool type and deformation setting play an important role in determining the thermal cycling reliability of the ribbon bond.
Zitieren
APA
Loh, W. S., Agyakwa, P. A., Johnson, C. M., Loh, T., Luechinger, C., & Oftebro, K. (2026). Thick Al Ribbon Interconnects: A Feasible Solution for Power Devices Packaging. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.164860
Vancouver
Loh WS, Agyakwa PA, Johnson CM, Loh T, Luechinger C, Oftebro K. Thick Al Ribbon Interconnects: A Feasible Solution for Power Devices Packaging. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.164860
BibTeX
@article{Loh2026,
author = {Loh, Wei Sun and Agyakwa, Pearl A. and Johnson, C. Mark and Loh, Tick-Kwang and Luechinger, Christoph and Oftebro, Kristian},
title = {Thick Al Ribbon Interconnects: A Feasible Solution for Power Devices Packaging},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.164860}
}
EUVIMED