EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Copper Electroplating Process for mSAP in the Era of AI and HPC

Saminda Dharmarathna, Sean Fleuriel, Charles Bae, Eric Kil, Sy Maddux, Leslie Kim, Brian Gokey, Ernie Long

Journal of Microelectronics and Electronic Packaging · 15.06.2025 · 22 (2)

DOI: 10.4071/001c.140581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Microelectronics and Electronic Packaging, online erschienen am 15.06.2025. Verfasst von Saminda Dharmarathna und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rapid growth of artificial intelligence (AI) and high-performance computing (HPC), the demand for advanced semiconductor technologies continues to rise. These applications require packaging solutions that deliver high performance, reliability, and miniaturization. Modified semi-additive processing (mSAP) has become essential for enabling fine features such as high-density redistribution layers (RDL) and stacked vias in modern IC substrates and printed circuit boards (PCBs). However, several challenges remain in implementing mSAP at scale. One issue is V-pitting, which can occur during the flash etching step, and reduces the mechanical and electrical reliability of copper interconnects. Conventional approaches to mitigate V-pits often involve energy-intensive baking steps, which increase cost and reduce throughput. In addition, traditional plating methods frequently lead to voids, seam voids, and non-uniform copper deposition—defects that undermine reliability and performance. Another key challenge is the dependency of many electroplating processes on specific tool configurations. Such tool-specific formulations can require significant capital investment and limit manufacturing flexibility. In contrast, a tool-agnostic process can be implemented across a range of plating systems, providing cost-effective scalability and easier integration into diverse production environments. Thermal stress is also becoming a critical concern as modern AI and HPC chips, including high-power Graphics Processing Units (GPUs) and Central Processing Units (CPUs), can consume over 1000 W. The resulting heat places significant mechanical stress on the substrate, leading to warpage. Substrate warping compromises the interconnect integrity and can lead to system failure. Therefore, copper deposits must possess the mechanical strength and ductility to withstand thermal cycling. This study introduces an optimized copper electroplating process designed to address these challenges. It uses a bottom-up filling mechanism, which ensures that copper deposition starts at the base of microvias and progresses upward. This approach prevents the formation of voids and seams, which are common in traditional top-down processes. By using a novel combination of additives—commonly referred to as suppressors, accelerators, and levelers—this method achieves a highly uniform, defect-free filling and consistent copper thickness across both die and panel. As IC substrates increase in unit size and the industry shifts toward panel-level packaging, maintaining uniformity across the entire panel becomes critical to ensuring product quality and performance. Importantly, the copper deposited using this process exhibits superior physical properties, including higher tensile strength and elongation. These characteristics enable the substrate to better absorb thermal stress and resist warpage, enhancing long-term reliability in high-power applications. Additionally, the deposit shows high purity with minimal organic and inorganic contaminants. This purity reduces grain boundary weakening and improves resistance to electromigration, which is critical for maintaining interconnect integrity under high current densities in advanced electronic devices. The process is tool-agnostic and works seamlessly with various plating systems, including vertical continuous plating (VCP) and high-speed plating (HSP). This adaptability enables faster adoption without requiring extensive equipment changes. Overall, this plating process offers a scalable, efficient, and robust solution that improves reliability, reduces manufacturing cost, and supports the demands of next-generation AI and HPC technologies.

Zitieren

APA

Dharmarathna, S., Fleuriel, S., Bae, C., Kil, E., Maddux, S., Kim, L., Gokey, B., & Long, E. (2025). Copper Electroplating Process for mSAP in the Era of AI and HPC. Journal of Microelectronics and Electronic Packaging, 22(2). https://doi.org/10.4071/001c.140581

Vancouver

Dharmarathna S, Fleuriel S, Bae C, Kil E, Maddux S, Kim L, et al. Copper Electroplating Process for mSAP in the Era of AI and HPC. Journal of Microelectronics and Electronic Packaging. 2025;22(2). doi:10.4071/001c.140581

BibTeX
@article{Dharmarathna2025,
  author = {Dharmarathna, Saminda and Fleuriel, Sean and Bae, Charles and Kil, Eric and Maddux, Sy and Kim, Leslie and Gokey, Brian and Long, Ernie},
  title = {Copper Electroplating Process for mSAP in the Era of AI and HPC},
  journal = {Journal of Microelectronics and Electronic Packaging},
  year = {2025},
  volume = {22},
  number = {2},
  doi = {10.4071/001c.140581}
}
Kostenlos starten →