EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Investigation of Cavity Fabrication Methods for Integrated Horn Antenna Structures in Low Temperature Cofired Ceramic (LTCC) Substrates

Cathleen Kleinholz, Bjorn Muller, Michael Fischer, Marc Dreissigacker, Oliver Nallaweg, Christian Tschoban, Karl-Friedrich Becker, Martin Schneider-Ramelow, Jens Muller

Journal of Microelectronics and Electronic Packaging · 2024

DOI: 10.4071/001c.127403 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Microelectronics and Electronic Packaging, 2024. Verfasst von Cathleen Kleinholz und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article investigates various fabrication methods for integrated horn antenna structures in a ceramic multilayer substrate and presents a fundamental investigation for a following silicon-ceramic-based space sensing sensor. Precise alignment of the individual tape layers, via placement and implementation of the cavity design is crucial for this application. Due to processrelated circumstances, cavity deformations and other undesirable defects affect the ceramic horn antenna structure. Different realization methods for cavities are investigated, e.g., fabrication in the green state of the ceramic and after the sintering process. The cavities are evaluated using x-ray examination, cross section, and scanning electron microscopy. By inserting carbon inlays into the cavities before the sintering process, the quality of the desired geometry is significantly increased. Furthermore, parameters for cavity fabrication after sintering using cold laser ablation were investigated and the feasibility of inclined sidewalls was demonstrated.

Zitieren

APA

Kleinholz, C., Muller, B., Fischer, M., Dreissigacker, M., Nallaweg, O., Tschoban, C., Becker, K., Schneider-Ramelow, M., & Muller, J. (2024). Investigation of Cavity Fabrication Methods for Integrated Horn Antenna Structures in Low Temperature Cofired Ceramic (LTCC) Substrates. Journal of Microelectronics and Electronic Packaging. https://doi.org/10.4071/001c.127403

Vancouver

Kleinholz C, Muller B, Fischer M, Dreissigacker M, Nallaweg O, Tschoban C, et al. Investigation of Cavity Fabrication Methods for Integrated Horn Antenna Structures in Low Temperature Cofired Ceramic (LTCC) Substrates. Journal of Microelectronics and Electronic Packaging. 2024. doi:10.4071/001c.127403

BibTeX
@article{Kleinholz2024,
  author = {Kleinholz, Cathleen and Muller, Bjorn and Fischer, Michael and Dreissigacker, Marc and Nallaweg, Oliver and Tschoban, Christian and Becker, Karl-Friedrich and Schneider-Ramelow, Martin and Muller, Jens},
  title = {Investigation of Cavity Fabrication Methods for Integrated Horn Antenna Structures in Low Temperature Cofired Ceramic (LTCC) Substrates},
  journal = {Journal of Microelectronics and Electronic Packaging},
  year = {2024},
  doi = {10.4071/001c.127403}
}
Kostenlos starten →