EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Necking Limits of Anisotropic Metal Sheets Using M-K Theory and Improved Plasticity Models

Yong Hou, Monica Trask, Yannis P. Korkolis

Solid State Phenomena · 15.04.2026 · 388 · 227-236

DOI: 10.4028/p-zmgcu2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 15.04.2026. Verfasst von Yong Hou und 2 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate prediction of the forming limit curve (FLC) is critical for evaluating sheet metal formability, yet the influence of plastic anisotropy remains controversial. In this study, the yielding behavior, hardening response, and strain-rate sensitivity of DC01 steel are experimentally characterized. Different yield criteria combined with a Swift hardening law and the Marciniak-Kuczyński (M-K) model are employed to predict the FLC. The results show that the high-order non-quadratic Yld2k-2d yield criterion captures both the yielding behavior and the forming limits. Numerical experiments using this material framework are then conducted. Variations in r-values have a limited effect on the FLC, in contrast to the common notion that high r-values mean high formability, whereas the equibiaxial tensile yield stress strongly governs the right-hand side.

Zitieren

APA

Hou, Y., Trask, M., & Korkolis, Y. P. (2026). Necking Limits of Anisotropic Metal Sheets Using M-K Theory and Improved Plasticity Models. Solid State Phenomena, 388, 227-236. https://doi.org/10.4028/p-zmgcu2

Vancouver

Hou Y, Trask M, Korkolis YP. Necking Limits of Anisotropic Metal Sheets Using M-K Theory and Improved Plasticity Models. Solid State Phenomena. 2026;388:227-236. doi:10.4028/p-zmgcu2

BibTeX
@article{Hou2026,
  author = {Hou, Yong and Trask, Monica and Korkolis, Yannis P.},
  title = {Necking Limits of Anisotropic Metal Sheets Using M-K Theory and Improved Plasticity Models},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {388},
  pages = {227--236},
  doi = {10.4028/p-zmgcu2}
}
Kostenlos starten →