EUVIMEDEUVIMED entdecken
Crossref

Comparative Numerical Analysis of Melting Enhancement in a Triplex Tube Latent Heat Storage Unit Using Rectangular Fins and Copper Nanoparticles

Aymen Abdellah Lasri, Fayçal Bouzit, Mohamed Bouzit

Defect and Diffusion Forum · 20.07.2026 · 453 · 241-256

DOI: 10.4028/p-yvca0s ↗

Kurz gefasst

Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 20.07.2026. Verfasst von Aymen Abdellah Lasri und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a computational investigation of melting enhancement in a triplex tube heat exchanger TTHX with rectangular fins considering RT-82 as the phase change material (PCM) and copper as nanoenhanced PCM (NEPCM). The number of fins was increased from 8 to 12, and copper nanoparticles were dispersed at a volume fraction of 2% and 3% to assess their effect on thermal energy storage TES. The evolution of the solid–liquid interface was simulated using the enthalpy–porosity formulation, and the system performance was evaluated in terms of liquid fraction, total melting time, and melting efficiency, defined as the ratio of latent heat absorbed to the input energy. Raising the number of fins from 8 to 12 reduced melting time by 30% relative to the reference case with eight fins only, indicating enhanced heat conduction and faster initial melting. The use of copper nanopcm with 3 vol% further cuts melting times by 55% compared with the same reference case due to the increase in effective thermal conductivity. Hence, in brief, moderate fin numbers coupled with 3 vol% copper rendered the fastest melting rates and highest storage efficiencies among those tested.

Zitieren

APA

Lasri, A. A., Bouzit, F., & Bouzit, M. (2026). Comparative Numerical Analysis of Melting Enhancement in a Triplex Tube Latent Heat Storage Unit Using Rectangular Fins and Copper Nanoparticles. Defect and Diffusion Forum, 453, 241-256. https://doi.org/10.4028/p-yvca0s

Vancouver

Lasri AA, Bouzit F, Bouzit M. Comparative Numerical Analysis of Melting Enhancement in a Triplex Tube Latent Heat Storage Unit Using Rectangular Fins and Copper Nanoparticles. Defect and Diffusion Forum. 2026;453:241-256. doi:10.4028/p-yvca0s

BibTeX
@article{Lasri2026,
  author = {Lasri, Aymen Abdellah and Bouzit, Fayçal and Bouzit, Mohamed},
  title = {Comparative Numerical Analysis of Melting Enhancement in a Triplex Tube Latent Heat Storage Unit Using Rectangular Fins and Copper Nanoparticles},
  journal = {Defect and Diffusion Forum},
  year = {2026},
  volume = {453},
  pages = {241--256},
  doi = {10.4028/p-yvca0s}
}
Kostenlos starten →