EUVIMEDEUVIMED entdecken
Crossref

Synthesis and Characterization of Alpha-Origin Chitosan from Penaeus (Fenneropenaeus) Indicus Exoskeleton Waste

Samrah Khan, Amna Amin Sethi, Eraj Humayun Mirza, S.M. Talib Ali, Sadia Hanif, Hamza bin Haseeb

Journal of Biomimetics, Biomaterials and Biomedical Engineering · 30.07.2026 · 73 · 65-78

DOI: 10.4028/p-xq3k4v ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomimetics, Biomaterials and Biomedical Engineering, online erschienen am 30.07.2026. Verfasst von Samrah Khan und 5 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chitosan, a biopolymer derived from chitin found in the exoskeletons of crustaceans and in insects, is known for its non-toxic, biocompatible, and biodegradable properties, making it highly valuable in biomedical applications. However, the high cost and variable purity of commercially available chitosan limit its widespread use. This study focuses on the synthesis and characterization of alpha-origin chitosan from Penaeus indicus exoskeleton waste using a multi-step process, including deproteinization, demineralization, deacetylation, and purification. Two purification strategies were employed; one incorporating a demetallization step to enhance material quality. Characterization was performed using contact angle analysis, Scanning Electron Microscopy (SEM), stereo microscopy, Energy-dispersive X-ray spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FTIR). The synthesized chitosan exhibited hydrophilic characteristics, with contact angles ranging from 61° to 73°, confirming its biodegradability and biocompatibility. The structural analysis of purified samples revealed improved porosity, surface morphology, and fibrous features. The removal of metallic impurities was confirmed by EDS, with oxygen and carbon making 99% of the composition of material. A high degree of deacetylation (>80%) was demonstrated by FTIR analysis. The most refined chemical profile was found to be exhibited by the demetallized chitosan. These results indicate that local shrimp shells can be used to synthesize high-purity α-chitosan with physicochemical properties similar to commercially used chitosan. The incorporation of demetallization step significantly improved the structural features and chemical purity of the material, making it suitable for biomedical applications. The proposed method provides a scalable, sustainable, and cost-effective synthesis approach that use inexpensive marine waste and reduce dependence on imported raw materials for producing high-quality chitosan for both industrial and biomedical applications.

Zitieren

APA

Khan, S., Sethi, A. A., Mirza, E. H., Ali, S. T., Hanif, S., & Haseeb, H. B. (2026). Synthesis and Characterization of Alpha-Origin Chitosan from Penaeus (Fenneropenaeus) Indicus Exoskeleton Waste. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 73, 65-78. https://doi.org/10.4028/p-xq3k4v

Vancouver

Khan S, Sethi AA, Mirza EH, Ali ST, Hanif S, Haseeb HB. Synthesis and Characterization of Alpha-Origin Chitosan from Penaeus (Fenneropenaeus) Indicus Exoskeleton Waste. Journal of Biomimetics, Biomaterials and Biomedical Engineering. 2026;73:65-78. doi:10.4028/p-xq3k4v

BibTeX
@article{Khan2026,
  author = {Khan, Samrah and Sethi, Amna Amin and Mirza, Eraj Humayun and Ali, S.M. Talib and Hanif, Sadia and Haseeb, Hamza bin},
  title = {Synthesis and Characterization of Alpha-Origin Chitosan from Penaeus (Fenneropenaeus) Indicus Exoskeleton Waste},
  journal = {Journal of Biomimetics, Biomaterials and Biomedical Engineering},
  year = {2026},
  volume = {73},
  pages = {65--78},
  doi = {10.4028/p-xq3k4v}
}
Kostenlos starten →