EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-Chemical Modeling and Experimental Validation of Pultruded Glass Fiber Reinforced Composites

Jacob Harris, Sangharsha Gharat, Luohaoran Wang, Ali Zolali, Alan Taub, Mihaela Banu

Solid State Phenomena · 14.04.2026 · 387 · 61-73

DOI: 10.4028/p-wf7rkc ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 14.04.2026. Verfasst von Jacob Harris und 5 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work develops and validates thermo-chemical models for pultrusion of glass fiber–reinforced polyurethane composites on an industrial PulFlex production line. A reduced one-dimensional model combining a calibrated Kamal–Sourour (KS) cure law with an Arrhenius type chemo-rheological viscosity formulation is cross-validated against a three-dimensional ANSYS Composite Cure Simulation using identical material inputs along a three-zone, 0.9144 m heated die. Embedded thermocouples provide in-die temperature histories at 50.8 cm·min⁻¹ for calibration, while additional differential scanning calorimetry (DSC) measurements supply degree of cure (DoC) profiles for independent validation. At the industrial operating speed of 50.8 cm·min⁻¹, the mathematical and ANSYS models both reproduce the measured temperature peak location and exit temperature within a few degrees Celsius and predict a die-exit DoC of approximately 0.95, confirming near-complete curing. Using these calibrated fields as inputs to an analytical pulling-resistance formulation, both models predict comparable pulling force magnitudes and plateau behavior, demonstrating that the simplified 1D framework can capture not only thermo-chemical evolution but also process resistance trends over a range of pulling speeds. The validated 1D model therefore enables efficient exploration of speed–temperature–force tradeoffs for process window design, while the 3D ANSYS model provides a higher-fidelity reference for local gradients and future thermo–chemo–mechanical extensions.

Zitieren

APA

Harris, J., Gharat, S., Wang, L., Zolali, A., Taub, A., & Banu, M. (2026). Thermo-Chemical Modeling and Experimental Validation of Pultruded Glass Fiber Reinforced Composites. Solid State Phenomena, 387, 61-73. https://doi.org/10.4028/p-wf7rkc

Vancouver

Harris J, Gharat S, Wang L, Zolali A, Taub A, Banu M. Thermo-Chemical Modeling and Experimental Validation of Pultruded Glass Fiber Reinforced Composites. Solid State Phenomena. 2026;387:61-73. doi:10.4028/p-wf7rkc

BibTeX
@article{Harris2026,
  author = {Harris, Jacob and Gharat, Sangharsha and Wang, Luohaoran and Zolali, Ali and Taub, Alan and Banu, Mihaela},
  title = {Thermo-Chemical Modeling and Experimental Validation of Pultruded Glass Fiber Reinforced Composites},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {387},
  pages = {61--73},
  doi = {10.4028/p-wf7rkc}
}
Kostenlos starten →