Investigating the Formability of Aluminium Alloy Tubes by Rubber Bulge Testing
Solid State Phenomena · 15.04.2026 · 388 · 73-79
DOI: 10.4028/p-w8fbjz ↗Kurz gefasst
Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 15.04.2026. Verfasst von Chanmi Moon und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Efficient characterization of formability of tubal sections is essential for designing lightweight aluminum extrusion components, particularly since the presence of weld seams and extrusion-induced inhomogeneities influence deformation behavior. This study evaluates the formability of Al–Mg–Si alloy tubes after being subjected to four different heat-treatment conditions, using a non-conventional rubber-assisted bulge test. A solid polyurethane (PU) plug was employed as pressure medium to enable full-scale deformation. Digital image correlation (DIC) was used to quantify circumferential and longitudinal strain evolutions, while post-fracture thickness measurements provided complementary insight into through-thickness strain.The measured circumferential strain at fracture ranged from 0.15 to 0.24 across the investigated tempers. The W-tempered condition exhibited the highest surface strain while maintaining moderate thickness reduction, whereas the soft-annealed tubes showed the largest thinning. The as-received and naturally aged conditions displayed similar deformation responses. These results demonstrate that tube formability, as evaluated by the present testing approach, is characterized by the combined evolution of surface strain and thickness reduction, both of which are influenced by heat treatment. Overall, the study shows that PU-assisted rubber bulge testing provides a practical and robust experimental framework for the comparative assessment of formability in extruded aluminum tubes.
Zitieren
APA
Moon, C., Sariyarlioglu, E. C., & Welo, T. (2026). Investigating the Formability of Aluminium Alloy Tubes by Rubber Bulge Testing. Solid State Phenomena, 388, 73-79. https://doi.org/10.4028/p-w8fbjz
Vancouver
Moon C, Sariyarlioglu EC, Welo T. Investigating the Formability of Aluminium Alloy Tubes by Rubber Bulge Testing. Solid State Phenomena. 2026;388:73-79. doi:10.4028/p-w8fbjz
BibTeX
@article{Moon2026,
author = {Moon, Chanmi and Sariyarlioglu, Eren Can and Welo, Togeir},
title = {Investigating the Formability of Aluminium Alloy Tubes by Rubber Bulge Testing},
journal = {Solid State Phenomena},
year = {2026},
volume = {388},
pages = {73--79},
doi = {10.4028/p-w8fbjz}
}
EUVIMED